beko dishwasher BDIN38641Q manual

The Beko BDIN38641Q is a freestanding dishwasher featuring a 14-place setting capacity, A++ energy rating, 5 wash programs, digital display, delay start, half load option, child lock, and AquaIntense technology for improved cleaning. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filters, and spray arms.

Installation

Unpack and inspect contents. Ensure location is level, near water supply, drain, and power outlet.

1. Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
2. Connect drain hose: Place hose into sink or connect to waste pipe (min height 40 cm).
3. Level the dishwasher: Adjust feet to ensure machine is stable and level.
4. Plug into power outlet: Use dedicated 220-240V, 50Hz socket with earthing.

WARNING! Ensure water and electrical connections are secure before first use. Do not use extension cords.

First-Time Setup

Before first wash, prepare the dishwasher.

1. Fill salt container: Remove lower basket, unscrew salt cap, fill with 1 kg of dishwasher salt, then tighten cap.
2. Fill rinse aid dispenser: Open dispenser lid on door, fill to MAX line with rinse aid, close lid.
3. Select language: Press and hold START for 3 seconds to cycle through display languages.
4. Run initial empty cycle: Select Intensive program without dishes to clean interior and remove manufacturing residues.

CAUTION! Only use dishwasher-specific salt, detergent, and rinse aid. Do not mix different types.

Specifications

• Model: BDIN38641Q
• Type: Freestanding dishwasher
• Capacity: 14 place settings
• Energy Class: A++
• Water Consumption: Approx. 9.5 liters per cycle (Eco program)
• Power Consumption: Approx. 0.78 kWh per cycle (Eco program)
• Noise Level: 49 dB(A)
• Programs: 5 (Intensive, Eco, Quick 30', Glass, Auto)
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Voltage/Frequency: 220-240V, 50Hz
• Inlet Water Pressure: 0.03 - 1 MPa

Controls and Settings

Control Panel: POWER button, Program selection buttons (Intensive, Eco, Quick, Glass, Auto), DELAY START (1-24h), HALF LOAD, CHILD LOCK, START/PAUSE.

Display Icons: Program indicator, time remaining, salt warning, rinse aid warning, child lock active, delay start active.

Program Details: Intensive (70°C, for heavily soiled pots), Eco (50°C, energy-saving daily wash), Quick (30 minutes at 45°C for lightly soiled), Glass (40°C for delicate items), Auto (sensors adjust time/temp based on soil). Options: Delay Start (postpone program), Half Load (reduces water for partial load), Child Lock (press and hold HALF LOAD for 3 sec).

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

1. Scrape off large food residues; pre-rinsing is not necessary.
2. Lower basket: For plates, pots, pans, and larger items.
3. Upper basket: For glasses, cups, saucers, and smaller dishes.
4. Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
5. Ensure items do not block spray arms or detergent dispenser.
6. Use recommended dishwasher detergent in main wash compartment; add pre-wash detergent if needed for heavy soil.

Tip: Place delicate items in upper basket, facing downwards. Avoid nesting items.

Using Wash Programs

Select program based on soil level and dish type.

1. Turn on: Press POWER.
2. Load dishes and add detergent/rinse aid.
3. Select program: Press desired program button (Intensive, Eco, Quick, Glass, Auto).
4. Set options: Press DELAY START to set delay time if needed; press HALF LOAD for partial load.
5. Start: Press START/PAUSE; door locks and cycle begins.
6. Pause/Add items: Press START/PAUSE to pause; wait for water to drain before opening door.
7. End of cycle: Display shows "End"; door unlocks after a short cooling period.

WARNING! Do not open door during hot wash phases to avoid steam burns. Wait for cycle to complete or pause first.

Care & Maintenance

Regular maintenance ensures longevity and performance.

1. Clean filters: Remove lower basket, twist and lift out filter assembly, rinse under warm water weekly.
2. Clean spray arms: Check for blockages in spray holes monthly.
3. Refill salt: When salt indicator lights, add dishwasher salt to container (use funnel).
4. Refill rinse aid: When rinse aid indicator lights, fill dispenser to MAX line.
5. Exterior cleaning: Wipe door and panel with damp cloth; do not use abrasive cleaners.
6. Run monthly cleaning cycle: Use dishwasher cleaner or place a cup of vinegar in upper basket and run Intensive program empty.

CAUTION! Unplug before any maintenance. Do not remove filters during operation.

Safety Information

Read all safety instructions before use.

• Connect to grounded outlet only.
• Do not wash items soiled with flammable substances.
• Do not sit or stand on open door.
• Keep children away from open dishwasher and detergent.
• Use only detergent, salt, and rinse aid designed for dishwashers.
• If malfunction occurs, disconnect power and water before inspection.

WARNING! Risk of electric shock if used improperly. Do not attempt repairs yourself; contact authorized service.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. If error persists, note error code on display.

Service: Contact authorized Beko service. Have model number (BDIN38641Q) and serial number ready.