Beko Dishwasher BDIN38644D Manual

The Beko BDIN38644D is a freestanding dishwasher with a capacity for up to 14 place settings, featuring an A++ energy rating, 6 wash programs, half-load option, delay timer, child lock, and salt/low rinse aid indicators. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Upper and Lower Baskets, Cutlery Basket, Filter System, Salt Container, Rinse Aid Dispenser, Inlet/Drain Hoses.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Wash Programs	6 programs including Intensive, Eco, Quick, Glass
Half Load Option	Reduces water and energy for smaller loads
Delay Timer	Program start delay up to 24 hours
Child Lock	Locks control panel during operation
Salt & Rinse Aid Indicators	LED alerts for low levels
Display	Digital display with remaining time
AquaStop	Leak protection system
Adjustable Upper Basket	Height adjustable for taller items

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place into sink or dedicated drain pipe (min height 40 cm).
Level the appliance: Adjust feet using a spanner for stability.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not bend or kink hoses. Ensure electrical plug is accessible after installation.

First-Time Setup

Before first use, run a wash cycle without dishes.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of special dishwasher salt, fill with water until overflow.
Fill rinse aid dispenser: Open lid on door, fill to MAX line with rinse aid.
Select language: Press and hold PROGRAM button for 5 seconds to cycle through languages.
Run initial cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding Dishwasher.
Capacity: 14 place settings.
Energy Class: A++.
Water Consumption: Approx. 11 liters per cycle (Eco program).
Power Consumption: Approx. 0.95 kWh per cycle (Eco program).
Programs: 6 (Intensive, Eco, Normal, Quick 30', Glass, Rinse).
Noise Level: 49 dB(A).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION, DELAY TIMER, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (70°C, for heavily soiled), Eco (50°C, energy saving), Normal (65°C, daily use), Quick 30' (30 min, lightly soiled), Glass (40°C, delicate), Rinse (cold rinse only).

Settings: Delay Timer (1-24 hrs), Half Load (activates for one basket), Child Lock (press and hold START for 3 sec), Salt/Rinse Aid indicators (LED alerts).

Loading the Dishwasher

Upper Basket: For glasses, cups, small plates. Lower Basket: For plates, pots, pans. Cutlery Basket: For knives, forks, spoons.

Scrape off large food residues; no need to pre-rinse.
Load dishes facing inward, not touching.
Place delicate items in upper basket.
Ensure spray arms can rotate freely.

Tip: Do not overload. Refer to loading diagrams on inner door.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Load dishes and add detergent to dispenser.
Select program: Press PROGRAM repeatedly to cycle through options.
Optional: Set DELAY TIMER or HALF LOAD.
Start: Press START/PAUSE. Display shows remaining time.
After cycle: Wait for door lock to release (approx. 2 min after end beep).

WARNING! Use only dishwasher detergent. Do not open door during hot wash phase.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean filter: Twist and lift out filter assembly weekly, rinse under tap.
Clean spray arms: Remove and check for blockages monthly.
Wipe door seals: Use damp cloth to remove residue.
Descale: Run empty cycle with dishwasher cleaner every 2 months.
Refill salt and rinse aid when indicators light.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Locks control panel and door during operation. AquaStop: Automatic water shut-off if leak detected. Door Lock: Door remains locked during wash cycles above 50°C.

Regulatory Information

CE Mark: Complies with European Directives. WEEE Symbol: Do not dispose with household waste. For disposal, contact local authorities. Energy Label: A++ rating according to EU regulation 1059/2010. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug, fuse, power supply; ensure door is closed properly.
Poor washing results	Loading/detergent	Check loading; use correct amount of fresh detergent; clean filter.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height is correct.
Salt indicator stays on	Salt level	Refill salt container; run a short program to reset.
Unusual noise	Spray arm/dishes	Ensure spray arms rotate freely; check dishes are not obstructing arms.
Error code E1	Water inlet	Check water tap is on; inspect inlet hose for kinks.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com