beko dishwasher BDIN38650C manual

The Beko BDIN38650C is a 60cm wide integrated dishwasher with A++ energy rating, 13 place settings capacity, 7 wash programs including Eco, Intensive, and Quick Wash, digital display, delay timer, half load option, child lock, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel interior, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, digital display, control panel.

Feature	Description
Energy Rating	A++ (energy efficient)
Capacity	13 place settings
Wash Programs	7 programs including Eco, Intensive, Quick
Digital Display	Shows remaining time, program, and status
Delay Timer	Up to 24 hours delay start
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Rinse Aid Indicator	Alerts when rinse aid is low
Salt Indicator	Alerts when water softener salt is low
AquaStop	Leak protection system

Installation

Unpack and inspect contents. Ensure installation area is level and near water/drain connections.

Position dishwasher: Slide into kitchen cabinet space, ensuring level feet.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet (10A fuse).
Secure to counter: Use screws provided to fix dishwasher to adjacent cabinets.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before use.

First-Time Setup

Before first use, prepare dishwasher and run initial cycle.

Remove transport materials: Take out all packaging, including transit bolts.
Fill salt container: Add 1 kg of dishwasher salt (first use may require 1.5L water).
Fill rinse aid: Pour into dispenser (max level indicated).
Run empty wash: Select Intensive program at highest temperature without dishes.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: BDIN38650C
Type: Integrated dishwasher
Width: 60 cm
Capacity: 13 place settings
Energy Rating: A++
Water Consumption: Approx. 10L per Eco cycle
Power Consumption: 0.78 kWh per Eco cycle
Noise Level: 49 dB(A)
Programs: 7 (Eco, Intensive, Auto, Quick, Glass, 90 Min, Rinse)
Voltage: 220-240V, 50Hz
Water Pressure: 0.03-1 MPa

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Timer, Half Load, Start/Pause, Child Lock.

Programs: Eco (energy saving), Intensive (heavy soil), Auto (sensor wash), Quick (58 min), Glass (gentle), 90 Min (standard), Rinse (rinse only).

Settings: Delay timer (1-24 hours), Half load (for upper basket only), Child lock (press and hold Start for 3 seconds), Rinse aid level adjustment (1-5), Salt refill indicator.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues; no need to pre-rinse.
Upper basket: Cups, glasses, small plates, plastic items.
Lower basket: Plates, pots, pans, larger items.
Cutlery basket: Knives, forks, spoons (handles down).
Ensure items do not block spray arms or detergent dispenser.
Load delicate items securely to prevent movement.

Tip: Place heavily soiled items facing center spray arm. Do not overload baskets.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press ON/OFF button.
Load detergent: Add powder or tablet to dispenser (check compartment for pre-wash if needed).
Select program: Press program button (Eco recommended for daily use).
Optional settings: Set Delay Timer or Half Load if required.
Start: Press Start/Pause; door locks automatically.
After cycle: Wait for end signal; open door slightly to let steam escape before unloading.

WARNING! Do not open door during wash cycle; hot steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Clean filters: Remove lower basket, twist out filter assembly, rinse under tap weekly.
Clean spray arms: Check for blockages; remove and clean if necessary.
Check salt level: Refill when indicator light comes on (use only dishwasher salt).
Check rinse aid: Refill when indicator shows low (adjust dispenser setting if needed).
Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects to clean spray arms.

Safety Information

Read all instructions before use. Keep children away from open dishwasher. Use only detergents for dishwashers. Do not wash items soiled with flammable substances. Ensure door is closed during operation. Disconnect power before servicing.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check power supply; ensure door closed properly; disable child lock.
Poor cleaning results	Loading, detergent, filters	Reload dishes properly; use correct detergent amount; clean filters.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks; clean filter; ensure proper installation height.
Noise during operation	Spray arm, items touching	Ensure spray arms rotate freely; reposition dishes not touching interior.
Leaking water	Door seal, hose connections	Check door seal for debris; tighten hose connections; ensure level installation.
Salt/Rinse Aid indicators on	Low levels	Refill salt and/or rinse aid containers.

Reset: Turn off power for 5 minutes, then restart.

Service: For persistent issues, contact authorized Beko service: 0333 207 9710 or visit www.beko.co.uk