beko dishwasher BDIS36020 manual

The Beko BDIS36020 is a freestanding dishwasher with a 12-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, half-load option, child lock, and AquaIntense technology for intensive cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, digital display, control panel.

FeatureDescription
Capacity12 place settings
Energy RatingA++
AquaIntense TechnologyIntensive cleaning for heavily soiled dishes
Digital DisplayShows program time, delay start, and status
Delay StartProgram start delay up to 24 hours
Half Load OptionEco wash for smaller loads
Child LockPrevents accidental program changes
Quick Wash30-minute program for lightly soiled items
Extra DryEnhanced drying performance
Water SoftenerAdjustable for different water hardness levels

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
  3. Level the dishwasher: Adjust feet to ensure machine is stable.
  4. Plug into grounded power outlet.

WARNING! Ensure water connections are tight to prevent leaks. Use only cold water connection.

First-Time Setup

Before first use, run an empty wash cycle with detergent.

  1. Remove shipping materials: Check interior for transit bolts and remove.
  2. Set water hardness: Adjust water softener according to local water hardness.
  3. Add rinse aid: Fill rinse aid dispenser to MAX level.
  4. Run initial cycle: Select Intensive program without dishes to clean interior.

CAUTION! Do not use regular dish soap. Use only dishwasher detergent.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Indicators: Program time, delay hours, end of cycle, salt warning, rinse aid warning.

Program Selection: Intensive (75°C), Eco (50°C), Quick (30 min), Glass (45°C), Auto (45-65°C). Settings: Water hardness (levels 1-5), rinse aid dosage (1-5), acoustic signal on/off. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Loading the Dishwasher

Upper basket: Glasses, cups, small plates. Lower basket: Plates, bowls, pots. Cutlery basket: Knives, forks, spoons.

  1. Scrape off large food residues before loading.
  2. Load dishes facing inward, not touching each other.
  3. Place delicate items in upper basket.
  4. Ensure spray arms can rotate freely.

Tip: Do not overload. Place sharp knives pointing downward.

Wash Programs

Select program based on soil level and dish type.

  1. Intensive: 75°C, for heavily soiled pots and pans.
  2. Eco: 50°C, energy-efficient for normally soiled dishes.
  3. Quick: 30 minutes, for lightly soiled, rinse-only items.
  4. Glass: 45°C, gentle wash for crystal and glassware.
  5. Auto: 45-65°C, automatically adjusts based on soil sensors.

WARNING! Plastic items on lower rack may warp. Use upper rack for plastic.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Clean filters: Remove and rinse under water weekly.
  2. Check spray arms: Ensure holes are not clogged.
  3. Refill salt: When salt warning light appears, add to reservoir.
  4. Wipe door seals: Clean with damp cloth to prevent mold.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open door (risk of hot steam).

WARNING! Do not open door during wash cycle. Hot water may cause burns.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorCheck power supply; ensure door is closed properly.
Poor washing resultsLoading/filtersCheck loading; clean filters; use correct detergent.
Water not drainingDrain hoseCheck drain hose for kinks; clean filter.
Salt warning light onSalt level lowRefill salt in reservoir.
Unusual noiseSpray arm/dishesCheck for obstructed spray arm; ensure dishes not touching it.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center.

beko dishwasher BDIS36020 manual © - All Rights Reserved 2025