beko dishwasher BDIS38040A manual

The Beko BDIS38040A is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, child lock, and half-load option. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Rinse Aid 8. Wash Programs 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, digital display, control panel.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Digital Display	Shows program time, delay, and status
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Half Load
Delay Start	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Reduces water and energy for smaller loads
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid is low
Acoustic Signal	Audible alert at end of cycle

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet to ensure stability.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without dishes to clean interior.

Fill salt dispenser: Remove lower basket, twist cap, add 1 kg of dishwasher salt.
Fill rinse aid: Open dispenser on door, fill to MAX line with rinse aid.
Add detergent: Place detergent in main wash compartment.
Select program: Choose Intensive program at highest temperature.
Start cycle: Close door and press Start/Pause.

CAUTION! Only use dishwasher-specific salt and rinse aid.

Specifications

Model: BDIS38040A
Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Rating: A++
Water Consumption: 9.5 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz
Water Pressure: 0.03-1 MPa

Controls and Settings

Control Panel: Power On/Off, Program Selection, Delay Start, Half Load, Child Lock, Start/Pause.

Display Icons: Program indicator, Delay time, Salt/Rinse Aid refill, Child Lock, End of cycle.

Program Selection: Auto (senses soil level), Intensive (70°C), Eco (50°C), Quick (30 min), Glass (40°C), Half Load. Settings: Delay Start (1-24 hours), Child Lock (hold 3 sec to activate/deactivate), Acoustic Signal (can be turned off in settings).

Loading the Dishwasher

Upper basket: Glasses, cups, small plates. Lower basket: Plates, bowls, pots. Cutlery basket: Knives, forks, spoons.

Scrape off large food residues; no need to pre-rinse.
Load dishes facing center, ensuring water spray can reach all surfaces.
Place delicate items in upper basket; secure stemware in holders.
Do not overload; leave space between items.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Detergents and Rinse Aid

Use only dishwasher detergents; never use hand soap or laundry detergent.

Detergent: Fill main wash compartment (approx. 25 ml for normal load).
Pre-wash: For heavily soiled loads, add small amount to pre-wash compartment.
Rinse aid: Adjust dispenser setting (1-6) based on water hardness.
Salt: Refill when indicator light comes on; use only regenerating salt.

WARNING! Keep detergents out of reach of children. Store in cool, dry place.

Wash Programs

Select program based on soil level and dish type.

Program	Temperature	Duration	Use For
Auto	45-65°C	105 min	Mixed soil, daily use
Intensive	70°C	155 min	Heavy soil, pots/pans
Eco	50°C	200 min	Normal soil, energy saving
Quick	30°C	30 min	Light soil, rinse only
Glass	40°C	85 min	Glassware, delicate items
Half Load	50°C	95 min	Small loads, saves resources

Note: Duration may vary based on water temperature and soil level.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean interior monthly.

Filter cleaning: Remove lower basket, twist filter assembly, rinse under water.
Spray arms: Check for blockages; rotate manually to ensure free movement.
Door seal: Wipe with soft cloth to remove debris.
Exterior: Use mild detergent; never use abrasive cleaners.

CAUTION! Do not use steam cleaners. Empty dishwasher before cleaning filters.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power supply; ensure door is closed properly.
Poor washing results	Loading/detergent	Rearrange dishes; use correct amount of fresh detergent.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks or blockages.
Leaking water	Hoses/door seal	Tighten connections; check door seal for damage.
Unusual noise	Spray arm/foreign object	Check for obstruction in spray arms; remove foreign objects.
Salt indicator on	Low salt	Refill salt dispenser; run short program to flush.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com