Beko Dishwasher BDIS38040Q Manual

The Beko BDIS38040Q is a freestanding dishwasher with a 14-place setting capacity, featuring 7 wash programs, A++ energy rating, 49 dB noise level, delay timer, half load option, child lock, and salt and rinse aid indicators. It includes adjustable upper basket, cutlery basket, and AquaIntense technology for stubborn stains. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper basket, lower basket with foldable racks, cutlery basket, filter system, salt container, rinse aid dispenser, and inlet/drain hoses.

FeatureDescription
Capacity14 place settings
Energy RatingA++
Noise Level49 dB
Wash Programs7 programs including Intensive, Eco, Quick, Glass
Delay TimerUp to 24 hours
Half Load OptionFor smaller loads to save water and energy
Child LockPrevents accidental program changes
AquaIntense TechnologyTargeted spray for heavily soiled items
Salt & Rinse Aid IndicatorsLED alerts for refills
Adjustable Upper BasketHeight adjustable for taller items

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

  1. Connect water supply: Attach inlet hose to water tap (max water pressure 1 MPa).
  2. Connect drain hose: Place hose into sink or standpipe (min height 40 cm, max 100 cm).
  3. Level the appliance: Adjust feet to ensure dishwasher is stable.
  4. Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Do not bend or kink hoses. Ensure electrical socket is easily accessible.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

  1. Remove transport safety materials: Check interior for any packing strips.
  2. Fill salt container: Add dishwasher salt up to rim, then add water first time only.
  3. Fill rinse aid dispenser: Open cap, fill to MAX line, close securely.
  4. Run initial empty cycle: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Use program button combination to match local water hardness level.

CAUTION! Only use dishwasher salt and rinse aid specified for dishwashers.

Specifications

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Timer, Half Load, Start/Pause, Child Lock, Salt and Rinse Aid indicators.

Program Guide:

Settings: Delay timer (1-24h), Half load (for upper basket only), Child lock (press 3 sec to activate).

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: Pots, pans, plates, bowls. Place heavily soiled items facing center.
  3. Upper basket: Cups, glasses, small plates, plastic items. Use fold-down cup holders.
  4. Cutlery basket: Place knives pointing down, spoons and forks mixed for separation.
  5. Adjust upper basket: Lift to higher position for taller items in lower basket.
  6. Ensure spray arms rotate freely; no items blocking them.

Tip: Do not overload; water must reach all surfaces. Place delicate items in upper basket.

Using Wash Programs

Select program based on soil level and dish type.

  1. Add detergent: Fill main wash compartment for pre-wash and main wash.
  2. Select program: Press program button until desired program LED lights.
  3. Optional settings: Press Delay Timer to set start time; press Half Load if needed.
  4. Start: Press Start/Pause; door locks automatically. Display shows remaining time.
  5. Pause/change: Press Start/Pause to interrupt; wait 3 sec, then change program.
  6. End of cycle: Buzzer sounds; wait a few minutes before opening (steam release).

WARNING! Only use dishwasher detergent. Do not open door during hot wash phases.

Maintenance & Care

Regular maintenance ensures longevity and performance.

CAUTION! Unplug before any maintenance. Do not use sharp objects to clean spray arms.

Safety Information

Read all safety instructions before use.

First Aid: If detergent ingested, drink plenty of water, seek medical advice.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startDoor not closed, no power, child lockClose door firmly, check power outlet, deactivate child lock.
Poor cleaning resultsOverloaded, wrong program, clogged filter, low detergentLoad properly, select Intensive program, clean filter, use correct detergent amount.
Water not drainingDrain hose kinked, filter blockedStraighten hose, clean filter.
Leaking waterDoor not sealed, hose connections looseCheck door seal, tighten hose connections.
Salt indicator blinkingSalt container emptyRefill with dishwasher salt.
Unusual noiseSpray arm hitting dishes, foreign object in pumpRearrange load, check for objects in base.

Reset: Turn off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service at www.beko.com or local service center.

Beko Dishwasher BDIS38040Q Manual © - All Rights Reserved 2025