beko dishwasher BDIS38042Q manual

The Beko BDIS38042Q is a freestanding dishwasher with a 12-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, delay start function, child lock, half-load option, and AquaIntense technology for improved cleaning performance. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Spray arms, Filters, Salt container, Rinse aid dispenser, Cutlery basket, Upper and lower baskets.

Feature	Description
Energy Rating	A++ for energy efficiency
Capacity	12 place settings
Wash Programs	6 programs including Intensive, Eco, Quick
Delay Start	Programmable delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load	Option for washing fewer dishes
AquaIntense	Enhanced spray system for tough stains
Display	Digital display with remaining time
Interior	Stainless steel for durability
Dimensions (HxWxD)	85cm x 60cm x 60cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to water tap (max pressure 1MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40cm).
Level the dishwasher: Adjust feet to ensure stability.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure before first use. Follow local plumbing codes.

First-Time Setup

Before first wash, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1kg of dishwasher salt, then refill with water.
Fill rinse aid: Open dispenser on door, fill to MAX line, close.
Run empty wash: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness (see manual).

CAUTION! Use only dishwasher salt and rinse aid; table salt may damage the appliance.

Specifications

Model: BDIS38042Q
Type: Freestanding dishwasher
Capacity: 12 place settings
Energy Rating: A++
Water Consumption: 10 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB
Voltage/Frequency: 220-240V, 50Hz
Programs: Intensive, Eco, Quick 30', Glass, Delicate, Auto
Special Features: Delay start, child lock, half load, AquaIntense

Controls and Settings

Control Panel: ON/OFF button, Program selector, Delay start, Half load, Child lock, Start/Pause.

Programs: Intensive (70°C, heavy soil), Eco (50°C, daily wash), Quick 30' (light soil), Glass (40°C, fragile items), Delicate (40°C, delicate items), Auto (sensors adjust temperature).

Settings: Use program buttons to set water hardness (1-5). Delay start: Press delay button to set 1-24 hours. Child lock: Press and hold child lock for 3 seconds. Half load: Select when washing fewer dishes in upper basket only.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans (face inward).
Upper basket: Glasses, cups, small bowls (face downward).
Cutlery basket: Place knives, forks, spoons; mix types for better cleaning.
Ensure items do not block spray arms.

Tip: Refer to loading diagrams in manual for best results.

Wash Programs

Select program based on soil level and dish type.

Intensive: 70°C, for heavily soiled pots and pans.
Eco: 50°C, energy-efficient daily wash.
Quick 30': 45°C, for lightly soiled dishes.
Glass: 40°C, gentle wash for crystal and glassware.
Delicate: 40°C, for delicate china and plastic.
Auto: Sensors adjust time and temperature.

WARNING! Do not open door during wash cycle; hot steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters weekly: Remove lower basket, twist filter assembly, rinse under water.
Check spray arms monthly: Ensure holes are not clogged.
Refill salt when indicator light comes on (approx. every 20 cycles).
Refill rinse aid when indicator shows low.
Wipe door seals and interior with damp cloth.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Safety Features

Child lock: Prevents program changes. Overflow protection: Automatically stops water if detected. Thermal protection: Prevents overheating. Door safety lock: Door locks during wash cycle.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. For support, visit www.beko.com or contact local service center. Waste disposal: Dispose of packaging and old appliance according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check power supply; ensure door is closed properly.
Poor cleaning results	Loading/filters	Check loading; clean filters; use correct detergent.
Water not draining	Drain hose/filter	Check drain hose for kinks; clean filter.
Detergent not dissolving	Detergent compartment	Ensure compartment is dry before adding detergent.
Noise during operation	Spray arms/items	Ensure spray arms rotate freely; check for loose items.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com