beko dishwasher BDIS38050Q manual

The Beko BDIS38050Q is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 5 wash programs, a digital display, delay timer, half-load option, and AquaIntense technology for improved cleaning performance. It includes child lock, salt and rinse aid indicators, and operates at a noise level of 49 dB. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filters, and spray arms.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (Energy Efficient)
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Auto
Digital Display	Shows program time, delay timer, and status indicators
Delay Timer	Program start delay up to 24 hours
Half Load Option	Reduces water and energy for smaller loads
AquaIntense Technology	Enhanced spray system for better cleaning
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	LED alerts for refilling
Noise Level	49 dB (Quiet operation)

Installation

Unpack and inspect contents. Ensure location is near water supply, drain, and power outlet.

Position dishwasher: Place on level floor near sink area.
Connect water supply: Attach inlet hose to cold water tap using provided connector.
Connect drain hose: Secure to sink drain or standpipe (ensure no kinks).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet to ensure stability.

WARNING! Installation must comply with local plumbing and electrical regulations. Do not use extension cords.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging inside baskets.
Fill salt container: Unscrew cap, add 1 kg of dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX mark.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match local water hardness (see manual).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: BDIS38050Q
Type: Freestanding Dishwasher
Capacity: 14 place settings
Energy Class: A++
Water Consumption: Approx. 10 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Programs: 5 (Intensive, Eco, Quick 30', Glass, Auto)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Noise Level: 49 dB

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION buttons, DELAY TIMER, HALF LOAD, START/PAUSE, CHILD LOCK.

Display Icons: Program time, delay timer, salt indicator, rinse aid indicator, end cycle, child lock.

Program Selection: Press PROGRAM button to cycle through options. Delay Timer: Press DELAY to set start time (1-24 hours). Half Load: Activates economy wash for smaller loads. Child Lock: Press and hold CHILD LOCK for 3 seconds to enable/disable. Settings: Water hardness can be adjusted via button combination (see manual).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing required).
Lower basket: For plates, pots, pans. Adjustable rack height for taller items.
Upper basket: For glasses, cups, small bowls. Fold-down tines for flexibility.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Detergent: Add powder or tablet to dispenser. Use rinse aid for better drying.

Tip: Do not overload. Ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

Intensive: For heavily soiled pots and pans (75°C, 150 min).
Eco: Energy-efficient for normally soiled dishes (50°C, 180 min).
Quick 30': For lightly soiled loads, rapid wash (55°C, 30 min).
Glass: Gentle wash for delicate glassware (40°C, 90 min).
Auto: Automatically adjusts time/temp based on soil sensors.
To start: Close door, select program, press START/PAUSE.
To pause: Press START/PAUSE during cycle to add forgotten items.
After cycle: Wait for end signal; open door slightly to allow steam to escape.

WARNING! Do not open door during hot wash phases to avoid steam burns.

Maintenance & Care

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist and lift out filter assembly, rinse under tap weekly.
Clean spray arms: Check for blockages, rinse holes.
Wipe door seals: Use damp cloth to remove debris.
Descale: Run empty cycle with dishwasher cleaner every 2 months if in hard water area.
Refill salt: When salt indicator lights, add salt to container (only for models with water softener).
Refill rinse aid: When rinse aid indicator lights, fill dispenser.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open door (hot surfaces).
Sharp knives should be placed horizontally in upper basket.
Only use detergents and rinse aids designed for dishwashers.
Do not sit or stand on open door.

WARNING! Risk of electric shock. Do not operate if cord or appliance is damaged.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste disposal: Dispose of according to local regulations; do not dispose with household waste. For support, visit www.beko.com or contact local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check plug, fuse, and ensure door is closed properly.
Poor cleaning results	Loading/detergent	Rearrange load, ensure spray arms rotate freely, use correct detergent amount.
Water not draining	Filter/drain hose	Clean filter, check drain hose for kinks or blockages.
Noise during operation	Foreign objects	Check for small items touching spray arms.
Leaking water	Hose connections	Ensure inlet and drain hoses are securely connected.
Salt indicator remains on	Salt container empty	Refill with dishwasher salt.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.