Beko Dishwasher BDIS38120A Manual

The Beko BDIS38120A is a freestanding dishwasher with 12 place settings, A++ energy rating, 5 wash programs, delay start function, half load option, child lock, and salt/low rinse aid indicators. It features a stainless steel interior, adjustable upper basket, cutlery basket, and digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, stainless steel tub, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser.

FeatureDescription
Capacity12 place settings
Energy RatingA++
Wash Programs5 programs including Intensive, Eco, Quick
Delay Start1-24 hours delay timer
Half LoadOption for smaller loads
Child LockSafety lock function
Salt IndicatorLight indicates when to refill salt
Rinse Aid IndicatorLight indicates when to refill rinse aid
Digital DisplayShows program time and status
Adjustable Upper BasketHeight adjustable for taller items

Installation

Unpack and inspect contents. Position near water supply and drain.

  1. Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
  2. Connect drain hose: Ensure proper drainage without kinks.
  3. Level the dishwasher: Adjust feet for stability.
  4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water connections are tight to prevent leaks. Use only recommended hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Take out all packaging inside.
  2. Fill salt container: Add dishwasher salt (first use requires 1.5kg).
  3. Fill rinse aid: Pour into dispenser up to MAX line.
  4. Run empty wash: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (70°C, 150 min), Eco (50°C, 180 min), Quick (45°C, 30 min), Glass (40°C, 40 min), Rinse (cold, 15 min).

Settings: Delay start (1-24 hours), Half load (reduces water usage), Child lock (press and hold for 3 seconds), Salt indicator (flashes when low), Rinse aid indicator (flashes when low).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Lower basket: Plates, pots, pans (face inward).
  2. Upper basket: Glasses, cups, small bowls.
  3. Cutlery basket: Knives, forks, spoons (handles down).
  4. Adjust upper basket: Lift to accommodate tall items.
  5. Do not overload: Ensure water can reach all surfaces.

Tip: Scrape off large food residues before loading. Do not pre-rinse.

Using Wash Programs

Select program based on soil level and dish type.

  1. Turn on: Press POWER button.
  2. Select program: Use PROGRAM button to cycle through options.
  3. Add options: Press DELAY START or HALF LOAD if needed.
  4. Start: Press START/PAUSE to begin cycle.
  5. Pause: Press START/PAUSE during cycle to add items.
  6. End of cycle: Buzzer sounds; dishes remain warm for drying.

WARNING! Do not open door during hot wash cycles. Steam may cause burns.

Maintenance

Regular maintenance ensures optimal performance.

Care & Cleaning

Unplug before cleaning exterior. Use damp cloth only; no abrasive cleaners.

CAUTION! Do not use steam cleaners. Keep control panel dry.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorCheck power supply; ensure door is closed properly.
Poor cleaning resultsLoading/filterCheck loading; clean filter; use correct program.
Water not drainingDrain hose blockedCheck drain hose for kinks; clean filter.
Salt indicator flashingLow saltRefill salt container.
Unusual noiseSpray arm obstructionCheck for objects blocking spray arms.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com

Beko Dishwasher BDIS38120A Manual © - All Rights Reserved 2025