Beko Dishwasher BDIS38120Q Manual

The Beko BDIS38120Q is a freestanding dishwasher with a 12-place setting capacity, featuring an A++ energy rating, 5 wash programs, a digital display, half-load option, child lock, delay start timer, and AquaIntense technology for improved cleaning. It operates on 220-240V~ 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upper and lower baskets, cutlery basket, detergent dispenser, digital control panel, water inlet and drain hoses, filters.

Feature	Description
Capacity	12 standard place settings
Energy Rating	A++ (Energy efficient)
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Auto
Digital Display	Shows program, time remaining, and status
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Delay Start	Timer up to 24 hours
AquaIntense Technology	Enhanced spray system for better cleaning
Salt & Rinse Aid Indicators	Lights alert when refill is needed
Acoustic Signal	Beeps at end of cycle

Installation

Unpack and inspect contents. Position near water supply, drain, and power outlet.

Connect water inlet: Attach supplied hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place into sink or standpipe (min height 40 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable.
Plug into grounded power outlet (220-240V~ 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or electric shock. Do not kink hoses.

First-Time Setup

Before first use, run a wash cycle without dishes.

Fill salt dispenser: Open cap, add 1 kg of dishwasher salt, then fill with water.
Fill rinse aid dispenser: Open lid, fill to MAX line, close.
Load detergent: Add powder or tablet to dispenser.
Select Intensive program and start cycle.
Set water hardness: Use program button combination to match local water hardness (see manual).

CAUTION! Use only dishwasher salt, rinse aid, and detergents. Do not use regular table salt.

Specifications

Model: BDIS38120Q
Type: Freestanding dishwasher
Capacity: 12 place settings
Energy Class: A++
Water Consumption: Approx. 9.5 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Programs: 5 (Intensive, Eco, Quick 30', Glass, Auto)
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V~ 50Hz

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (70°C, for heavily soiled), Eco (50°C, energy saving), Quick 30' (30 min, lightly soiled), Glass (40°C, delicate), Auto (sensors adjust temperature).

Settings: Delay Start (1-24 hours), Half Load (activates for smaller loads), Child Lock (press and hold for 3 seconds), Salt/Rinse Aid indicator reset (press PROGRAM + HALF LOAD).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans (face center).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Forks, knives, spoons (handles down).
Ensure spray arms can rotate freely; do not block with large items.

Tip: Place delicate items in upper basket, heavily soiled items facing spray arms.

Using Wash Programs

Select program based on soil level and dish type.

Load dishes and close door securely.
Add detergent to dispenser (check compartment is dry).
Press POWER ON.
Select program using PROGRAM button.
Optional: Set DELAY START or HALF LOAD.
Press START/PAUSE to begin cycle.
Cycle ends with acoustic signal; open door slightly to let steam escape.

WARNING! Do not open door during wash cycle; hot water may cause burns. Wait until program ends.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters weekly: Remove lower basket, twist filter assembly, rinse under tap.
Check spray arms monthly: Ensure holes are not clogged.
Wipe door seal and interior with damp cloth.
Use dishwasher cleaner every 2 months to remove limescale.
Refill salt and rinse aid when indicators light.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or sharp objects.

Safety Features

Child Lock: Prevents program changes. Door Safety Lock: Door locks during wash cycle. Overflow Protection: Automatically stops water if detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. For support, visit www.beko.com or contact local service center. Waste disposal: Dispose of packaging and old appliance according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check plug, ensure door closed properly, deactivate child lock.
Poor cleaning results	Loading, detergent, filters	Reload dishes properly, use correct detergent dose, clean filters.
Water not draining	Drain hose blockage	Check hose for kinks, clean filter, ensure standpipe height.
Leaking water	Door seal, hose connections	Check door seal for debris, tighten hose connections.
Unusual noise	Spray arm, foreign objects	Ensure spray arms rotate freely, remove objects from pump area.
Salt indicator stays on	Salt empty, setting incorrect	Refill salt, reset water hardness setting.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; do not attempt repairs yourself.