beko dishwasher BDUN26440W manual

The Beko BDUN26440W is a 24-inch built-in dishwasher with 14 place settings, 7 wash programs, energy-efficient EcoSilence Drive motor, AquaIntense technology for intensive cleaning, adjustable upper basket, half-load option, child lock, delay start, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper basket, cutlery basket, filter system, detergent dispenser, rinse aid dispenser, salt container, and spray arms.

FeatureDescription
Place Settings14 standard place settings capacity
Wash Programs7 programs including Eco, Intensive, Auto, Quick
AquaIntense TechnologyEnhanced spray system for stubborn stains
EcoSilence DriveEnergy-efficient and quiet motor
Half Load OptionReduces water/energy for smaller loads
Delay StartProgram start delay up to 24 hours
Child LockSafety lock for control panel
Adjustable Upper BasketHeight adjustable for taller items
Filter System3-stage filtration for clean water
Display IndicatorsShows remaining time, program, salt/rinse aid levels

Installation

Unpack and inspect contents. Ensure installation location meets requirements.

  1. Position dishwasher: Place in prepared cabinet opening or freestanding location.
  2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  3. Connect drain hose: Ensure proper drainage into sink or waste pipe.
  4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  5. Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Take out all packaging and securing items.
  2. Fill salt container: Add dishwasher salt to softener unit (first use only).
  3. Fill rinse aid: Pour rinse aid into designated dispenser.
  4. Run initial cycle: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Control panel includes program selector, start/pause button, delay timer, half load, and child lock.

Programs: Eco (default), Intensive, Auto, Quick 30', Glass, Delicate, Hygiene.

Display Symbols: Salt indicator, rinse aid indicator, child lock, delay start, program progress.

Settings: Water hardness (1-5), rinse aid dosage (1-4), acoustic signal on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

  1. Scrape off large food residues before loading.
  2. Load lower basket: Pots, pans, plates, bowls facing center.
  3. Load upper basket: Glasses, cups, small plates, plastic items.
  4. Cutlery basket: Place knives, forks, spoons with handles down.
  5. Adjust upper basket: Lift to accommodate taller items.
  6. Ensure spray arms rotate freely without obstruction.

Tip: Do not overload. Place delicate items in upper basket only.

Wash Programs

Select program based on soil level and dish type.

ProgramUse ForTemp (°C)Duration
EcoNormally soiled dishes, energy saving503:15 h
IntensiveHeavily soiled pots, pans702:45 h
AutoAutomatic soil detection45-652:00-3:00 h
Quick 30'Lightly soiled, quick wash400:30 h
GlassDelicate glassware, crystal401:45 h
DelicatePlastic items, fine china401:15 h
HygieneBaby bottles, sanitizing702:30 h

Note: Eco program is most energy-efficient for daily use.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Clean filter: Remove and rinse under water weekly.
  2. Clean spray arms: Check for blockages monthly.
  3. Refill salt: When salt indicator lights (approx. every 2 months).
  4. Refill rinse aid: When rinse aid indicator lights.
  5. Clean door seals: Wipe with damp cloth.
  6. Run empty cycle: Use Intensive program monthly to clean interior.

CAUTION! Unplug before maintenance. Use only recommended cleaning agents.

Safety Information

Read all safety instructions before use.

WARNING! Risk of electric shock if installed improperly.

Regulatory Information

CE marked according to EU directives. Complies with EN 50242, EN 60436, EN 60705 standards. Energy label according to EU regulation 2019/2017. Waste electrical products must not be disposed with household waste. Please recycle where facilities exist. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower supply, door not closedCheck power outlet; ensure door is properly closed.
Poor cleaning resultsIncorrect loading, clogged filterReload dishes properly; clean filter system.
Water not drainingDrain hose blocked/kinkedCheck drain hose for obstructions; ensure proper installation.
Salt indicator flashingSalt container emptyRefill with dishwasher salt.
Unusual noiseSpray arm obstruction, loose itemsCheck for items blocking spray arms; ensure dishes are secure.
Water leakageInlet/outlet hose connectionsTighten all water connections; check door seal.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model number ready.

beko dishwasher BDUN26440W manual © - All Rights Reserved 2025