beko dishwasher BDUN38641XD manual

The Beko BDUN38641XD is a freestanding dishwasher with a capacity of 14 place settings, featuring an A++ energy rating, 6 wash programs, digital display, delay start, child lock, and AquaIntense technology for improved cleaning. It includes a cutlery basket, adjustable upper basket, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filter system, and spray arms.

FeatureDescription
Capacity14 place settings
Energy RatingA++
Wash Programs6 programs including Intensive, Eco, Quick, Glass, etc.
Digital DisplayShows program, time remaining, and status indicators
Delay StartProgrammable delay up to 24 hours
Child LockPrevents accidental program changes
AquaIntense TechnologyEnhanced spray system for better cleaning
Adjustable Upper BasketHeight adjustable for larger items
Salt & Rinse Aid IndicatorsLED indicators for refill reminders
Half Load OptionEco wash for partial loads

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place hose into sink or standpipe (min height 40 cm).
  3. Level the dishwasher: Adjust feet to ensure stability.
  4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or electric shock. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, unscrew salt cap, add 1 kg of special dishwasher salt, then refill with water until overflow.
  2. Fill rinse aid dispenser: Open dispenser lid, fill to MAX line, close lid.
  3. Run empty wash: Select Intensive program without dishes to clean interior.
  4. Set water hardness: Use program button combination to set according to local water hardness (1-5).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Start, Child Lock, Start/Pause.

Display Icons: Program indicator, Time remaining, Salt refill, Rinse aid refill, Child lock active.

Program Selection: Press PROGRAM button to cycle through options. Delay Start: Press DELAY to set 2-24 hours. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Start/Pause: Press to begin or interrupt cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no pre-rinsing needed.
  2. Lower basket: For plates, pots, pans. Adjustable rack for larger items.
  3. Upper basket: For glasses, cups, small bowls. Height adjustable.
  4. Cutlery basket: Place knives, forks, spoons; ensure items do not nest.
  5. Detergent: Use tablets, powder, or gel in dispenser. Add rinse aid separately.

Tip: Do not overload; ensure spray arms can rotate freely.

Using Wash Programs

Select program based on load type.

  1. Intensive: For heavily soiled pots/pans (2h 30min, 65°C).
  2. Eco: Energy-efficient for normally soiled dishes (3h 15min, 50°C).
  3. Quick 30': Lightly soiled, quick wash (30min, 45°C).
  4. Glass: Delicate program for glassware (1h 20min, 40°C).
  5. Auto: Automatically adjusts time/temp based on soil detection (varies).
  6. Hygiene: For baby bottles, sanitizing (2h 10min, 70°C).

WARNING! Do not open door during wash; hot steam may escape.

Maintenance

Regular maintenance ensures performance.

  1. Clean filter: Remove lower basket, twist and lift out filter assembly, rinse under water weekly.
  2. Check spray arms: Ensure holes are not clogged; rotate manually.
  3. Refill salt: When salt indicator lights, add salt to container.
  4. Refill rinse aid: When rinse aid indicator lights, fill dispenser.
  5. Descale: Run empty with dishwasher cleaner every 2 months if in hard water area.

Care & Cleaning

Unplug before cleaning exterior. Wipe control panel and door with damp cloth. Clean door seal with soft cloth.

CAUTION! Do not use abrasive cleaners or solvents. Keep ventilation openings clear.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/child lockCheck power supply; ensure plug is in; deactivate child lock.
Poor cleaning resultsLoading/detergentEnsure proper loading; use correct detergent amount; clean filter.
Water not drainingDrain hose cloggedCheck hose for kinks; clean filter; ensure drain height correct.
Noise during operationSpray arm obstructionCheck for items blocking spray arms; ensure baskets properly placed.
Leaking waterHose connectionsTighten inlet/drain hoses; check door seal for debris.
Salt/Rinse aid indicators onLow levelsRefill salt and/or rinse aid as needed.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com

beko dishwasher BDUN38641XD manual © - All Rights Reserved 2025