beko dishwasher BDUS16020W manual

The Beko BDUS16020W is a 16-inch built-in dishwasher with energy-efficient operation, multiple wash programs, adjustable racks, delay start function, child lock, and salt/rinse aid indicators. Designed for standard kitchen installation, it features a stainless steel interior, electronic controls, and quiet operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, adjustable upper rack, cutlery basket, filter system, salt container, rinse aid dispenser, water inlet/outlet connections.

Feature	Description
Control Panel	Digital display with touch buttons for program selection
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	Programmable delay from 1 to 24 hours
Child Lock	Prevents accidental program changes
Adjustable Racks	Upper rack height adjustable for taller items
Salt Indicator	LED alerts when water softener salt is low
Rinse Aid Indicator	LED alerts when rinse aid needs refilling
Half Load Option	Reduces water consumption for partial loads
Acoustic Insulation	Reduced noise during operation
Energy Rating	A++ for energy efficiency

Installation

Unpack and inspect contents. Ensure proper electrical and plumbing connections.

Position dishwasher: Slide into standard 60cm cabinet opening.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper drainage into sink or waste pipe.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the unit: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks or hazards.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging inside the tub.
Fill salt container: Unscrew cap, add 1kg of dishwasher salt, then refill with water.
Fill rinse aid dispenser: Open compartment, fill to MAX line with rinse aid.
Run empty cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt or other substitutes.

Specifications

Model: BDUS16020W
Type: Built-in dishwasher
Place Settings: 12 standard place settings
Water Consumption: 9-12 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 82 x 59.8 x 55 cm
Voltage/Frequency: 220-240V, 50Hz
Max Inlet Water Pressure: 1 MPa (10 bar)
Programs: 6 main programs + 4 options

Controls and Settings

Access programs via control panel. Power Button: Turns dishwasher on/off. Program Selection: Press repeatedly to cycle through programs (Auto, Intensive, Eco, Quick, Glass, Rinse). Options: Delay Start (1-24h), Half Load, Extra Dry. Indicators: Salt, Rinse Aid, End of cycle.

Child Lock: Press and hold Power + Glass for 3 seconds to activate/deactivate.

Settings Menu: Press and hold Eco + Quick for 5 seconds to access water hardness, acoustic signal, rinse aid dosage adjustment.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Lower rack: Place plates, pots, pans facing center. Use fold-down tines for larger items.
Upper rack: Place glasses, cups, bowls. Adjust height if needed for taller items.
Cutlery basket: Place knives (blades down), forks, spoons in compartments.
Ensure spray arms rotate freely and items do not block detergent dispenser.

Tip: Do not overload. Place delicate items on upper rack away from heating element.

Wash Programs

Select program based on soil level and dish type.

Auto: Automatically adjusts time/temp based on soil sensors (2h 30min).
Intensive: For heavily soiled pots/pans (70°C, 2h 50min).
Eco: Energy-efficient for normally soiled dishes (50°C, 3h 15min).
Quick: For lightly soiled loads (45°C, 29min).
Glass: Gentle wash for crystal/glassware (40°C, 1h 15min).
Rinse: Rinse only without detergent (cold water, 15min).

WARNING! Use only dishwasher detergent. Do not use regular soap or washing powder.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove lower rack, twist filter assembly, rinse under water weekly.
Clean spray arms: Remove and check for clogged holes monthly.
Check salt level: Refill when indicator lights (approx. every 2 months).
Clean door seal: Wipe with damp cloth to remove debris.
Descale: Run empty cycle with dishwasher cleaner every 3 months.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners on interior.

Regulatory Information

CE compliant. Energy label: A++. Waste Electrical and Electronic Equipment (WEEE) directive: Do not dispose with household waste. For disposal, contact local authorities. Copyright © Beko plc. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check plug/power; ensure door is closed properly.
Poor cleaning results	Filter/detergent	Clean filter; use correct detergent amount; check spray arms.
Water not draining	Drain hose clogged	Check hose for kinks/clogs; clean filter.
Salt indicator flashing	Salt container empty	Refill with dishwasher salt.
Unusual noise	Spray arm obstruction	Check for items blocking spray arms.
Leaking water	Hose connections	Tighten inlet/drain hose connections; check door seal.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com