beko dishwasher BDW 201 manual

The Beko BDW 201 is a freestanding dishwasher with a 12-place setting capacity, featuring 5 wash programs, A++ energy rating, digital display, delay timer, child lock, salt and rinse aid indicators, and half-load option. It operates on 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, control panel, water inlet and drain hoses.

Feature	Description
Capacity	12 standard place settings
Energy Rating	A++ (Energy efficient)
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Rinse
Digital Display	Shows remaining time, program, and status indicators
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Reduces water and energy for smaller loads
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Acoustic Signal	Beeps when program ends

Installation

Unpack and inspect contents. Position near water supply and drain.

Connect water supply: Attach inlet hose to water tap (max water pressure 1 MPa).
Connect drain hose: Place hose into sink or dedicated drain pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure dishwasher is level and stable.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew salt cap, fill with special dishwasher salt (first use: add 1 liter of water).
Fill rinse aid dispenser: Open dispenser lid, fill to MAX line with rinse aid, close lid.
Add detergent: Use only dishwasher detergent in the main wash compartment.
Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only products specified for dishwashers. Do not mix different detergent types.

Specifications

Type: Freestanding dishwasher.
Capacity: 12 place settings.
Energy Class: A++.
Water Consumption: 9.5 liters per cycle (Eco program).
Power Consumption: 0.78 kWh per cycle (Eco program).
Noise Level: 49 dB(A).
Programs: 5 wash programs + 3 temperature options.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Weight: 42 kg.

Controls and Settings

Control Panel: POWER button, PROGRAM selector, DELAY TIMER, CHILD LOCK, START/PAUSE, HALF LOAD option.

Programs: Intensive (70°C), Eco (50°C), Quick (45°C, 30 min), Glass (40°C), Rinse (cold).

Settings: Delay timer (1-24 hours), Child lock (press and hold LOCK for 3 seconds), Half load (reduces water use for smaller loads). Indicators: Salt, Rinse aid, End of program. Display: Shows selected program, remaining time, and active options.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Plates, pots, pans (face inward).
Upper basket: Cups, glasses, small bowls (face downward).
Cutlery basket: Knives, forks, spoons (handles down, mixed for safety).
Do not overload; ensure spray arms can rotate freely.

Tip: Place delicate items in upper basket, heavily soiled items facing spray arms.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Fill main wash compartment (for pre-wash if heavily soiled).
Select program: Turn PROGRAM selector to desired cycle.
Set options: Press DELAY TIMER if needed, activate HALF LOAD for smaller loads.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to stop; wait 3 seconds before opening.
End of cycle: Acoustic signal sounds; wait a few minutes before opening (steam).

WARNING! Do not open door during wash cycle; hot steam may cause burns.

Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist out filter assembly, rinse under water weekly.
Check spray arms: Ensure holes are not clogged; rotate manually.
Refill salt: When salt indicator lights, add special dishwasher salt (approx. every 2 months).
Refill rinse aid: When rinse aid indicator lights, fill to MAX line.
Clean interior: Run empty cycle with dishwasher cleaner monthly.

Care & Cleaning

Unplug before cleaning exterior. Use damp cloth with mild detergent; avoid abrasive cleaners.

CAUTION! Do not use steam cleaners; keep control panel dry. Clean door seal regularly.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste disposal: Follow local regulations for electrical appliances. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check power supply; ensure door is properly closed.
Poor cleaning results	Loading/filters	Check loading; clean filters; use correct detergent amount.
Water not draining	Drain hose/filter	Check drain hose for kinks; clean filter assembly.
Salt indicator on	Low salt	Refill salt container; ensure cap is tightly closed.
Unusual noise	Spray arm/foreign object	Check for obstruction in spray arms; ensure dishes not touching spray arms.
Leaking water	Hose connections	Tighten water inlet and drain hose connections; check door seal.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com