Beko Dishwasher BDW200 Manual

The Beko BDW200 is a freestanding dishwasher with a 12-place setting capacity, featuring 6 wash programs, A++ energy rating, delay start function, half load option, child lock, and salt and rinse aid indicators. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and Lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet and drain hoses.

Feature	Description
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, 90 Minute, Rinse
Capacity	12 standard place settings
Energy Rating	A++ (Energy efficient)
Delay Start	Programmable delay from 1 to 24 hours
Half Load	Option for washing fewer dishes efficiently
Child Lock	Safety lock for control panel
Salt & Rinse Aid Indicators	LED lights to signal when to refill
Display	Digital display showing remaining time and program status
AquaStop	Protection against water leaks

Installation

Unpack and inspect contents. Position near water supply, drain, and power outlet.

Connect water inlet: Attach supplied hose to cold water tap (15 mm or ¾”).
Connect drain hose: Place into sink or connect to waste pipe (max height 1 m).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

Remove transport materials: Take out all polystyrene blocks and tapes inside.
Fill salt container: Add dishwasher salt up to the rim (first use requires 1.5 kg).
Fill rinse aid: Pour rinse aid into dispenser until indicator shows full.
Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher salt and rinse aid specified for dishwashers.

Specifications

Type: Freestanding Dishwasher.
Capacity: 12 place settings.
Programs: 6 wash programs.
Energy Class: A++.
Water Consumption: Approx. 9-11 liters per cycle (Eco program).
Power Consumption: Approx. 0.78 kWh per cycle (Eco program).
Noise Level: 49 dB(A).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Voltage: 220-240V, 50Hz.

Controls and Settings

Control Panel: POWER ON/OFF, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Programs: Intensive (70°C), Eco (50°C), Quick (30 min), Glass (40°C), 90 Minute, Rinse.

Settings: Use Delay Start to set timer. Press Half Load button when washing fewer dishes. Activate Child Lock by holding Lock button for 3 seconds. Display shows remaining time, program stage, and salt/rinse aid indicators.

Loading the Dishwasher

Load dishes according to basket guides for optimal cleaning.

Lower basket: Plates, pots, pans, larger items. Adjust basket height if needed.
Upper basket: Glasses, cups, saucers, small bowls.
Cutlery basket: Forks, knives, spoons, placed handle down.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Scrape off large food residues before loading. Do not pre-rinse under tap.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main detergent dispenser with powder or tablet. Use correct amount for water hardness.
Rinse aid: Fill dispenser; adjust dosage level (1-6) via dial inside dispenser lid.
Salt: Fill salt container when indicator light illuminates. Use only regenerating salt.
Combined tablets: If using 3-in-1 tablets, ensure they are suitable for your water hardness.

WARNING! Do not use regular washing-up liquid; it causes excessive suds.

Care & Maintenance

Regular maintenance ensures optimal performance.

Clean filter: Remove and rinse filter assembly under tap weekly.
Clean spray arms: Check for blockages in spray arm holes monthly.
Wipe door seals: Clean with damp cloth to remove debris.
Run empty hot cycle: Use Intensive program monthly to clean interior.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open door and detergent compartment. Do not open door during high-temperature programs. Ensure power cord is not damaged. In case of leak, turn off water supply and disconnect power.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/child lock	Check plug and power; ensure child lock is off; door closed properly.
Poor washing results	Loading/detergent	Check loading; ensure spray arms not blocked; use correct detergent amount.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks or blockages.
Salt indicator light on	Salt low	Refill salt container.
Unusual noise	Spray arm/foreign object	Check for items obstructing spray arm; remove foreign objects.
Error code on display	Various faults	Consult error code list in manual; reset by turning power off/on.

Reset: Turn off at mains for 2 minutes, then restart.

Service: For assistance, contact Beko Customer Support at 0333 207 9710 or visit www.beko.co.uk.