beko dishwasher DEN38530XAD manual

The Beko DEN38530XAD is a fully integrated dishwasher featuring a stainless steel interior, 14-place setting capacity, A++ energy rating, 6 wash programs (including Eco, Intensive, and Quick), adjustable upper basket, half-load function, delay start timer, child lock, and AquaIntense technology for improved cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, Control panel, Upper and lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Wash Programs	6 programs including Eco, Intensive, Quick, Glass, Auto, and Rinse
AquaIntense Technology	Enhanced spray system for better cleaning performance
Half Load Function	Reduces water and energy consumption for smaller loads
Delay Start Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Adjustable Upper Basket	Height adjustable for taller items
Display	LED digital display with remaining time indicator
Dimensions (HxWxD)	820 x 598 x 550 mm

Installation

Unpack and inspect contents. Ensure installation area is level and near water/drain connections.

Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Electrical connection: Connect to 220-240V, 50Hz grounded outlet.
Secure dishwasher: Adjust leveling feet for stability; ensure door opens freely.

WARNING! Dishwasher is heavy; use two people for handling. Ensure all connections are secure before first use.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging from interior.
Fill salt container: Add dishwasher salt to softener unit (first use requires 1.5kg).
Fill rinse aid: Fill rinse aid dispenser to MAX line.
Run initial cycle: Run Intensive program without dishes to clean interior.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: DEN38530XAD
Type: Fully Integrated Dishwasher
Capacity: 14 place settings
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 10.5 liters per cycle (Eco program)
Noise Level: 49 dB(A)
Programs: 6 wash programs + 3 additional functions
Dimensions: 820 x 598 x 550 mm (HxWxD)
Power Supply: 220-240V, 50Hz
Weight: 42 kg

Controls and Settings

Control Panel: POWER, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Program Selection: Eco (default), Intensive (70°C), Quick (58°C), Glass (45°C), Auto, Rinse.

Additional Functions: Delay Start (1-24 hours), Half Load (for upper basket only), Child Lock (press and hold for 3 seconds). Display: Shows remaining time, program indicators, and error codes.

Settings Menu: Access by pressing and holding Eco button for 5 seconds. Adjust: Water hardness (H1-H6), Rinse aid dosage (1-5), Acoustic signal (On/Off).

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans. Adjustable plate supports.
Upper basket: For glasses, cups, bowls. Height adjustable.
Cutlery basket: Place knives pointing down for safety.
Ensure spray arms can rotate freely; no items blocking them.

Tip: Refer to loading diagram on inner door for optimal arrangement.

Using Wash Programs

Select program based on soil level and dish type.

Eco: For normally soiled dishes (default, most efficient).
Intensive: For heavily soiled pots and pans (70°C).
Quick: For lightly soiled dishes (58°C, 30 minutes).
Glass: For delicate glassware (45°C).
Auto: Automatically adjusts time/temperature based on soil sensors.
Rinse: Rinse only, no detergent required.

To start: Close door, select program, add detergent, press Start/Pause. Program progress shown on display.

WARNING! Use only dishwasher detergent. Do not use regular soap.

Care & Maintenance

Regular maintenance ensures optimal performance.

Clean filter: Remove and rinse under water weekly.
Check spray arms: Ensure holes are not clogged.
Refill salt: When salt indicator light illuminates.
Refill rinse aid: When rinse aid indicator shows low.
Clean door seals: Wipe with damp cloth.
Run empty cycle: Monthly with dishwasher cleaner.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all safety instructions before use.

Connect to grounded outlet only.
Do not open door during operation; hot steam may escape.
Keep children away from open dishwasher.
Sharp items pointing down in cutlery basket.
Use only dishwasher-safe detergents and additives.
Do not wash items contaminated with gasoline or chemicals.

In case of emergency: Turn off water supply, unplug appliance.

Regulatory Information

CE Marked: Complies with European Directives. WEEE: Do not dispose with household waste; recycle appropriately. Energy Label: A++ rating according to EU regulations. For support, visit www.beko.com or contact local service center. Serial number located on side of door frame.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power connection; ensure door closed properly; check child lock.
Poor cleaning results	Loading/detergent	Check loading; use correct detergent amount; clean filter; check spray arms.
Water not draining	Drain hose/filter	Check drain hose for kinks; clean filter; ensure proper installation height.
Error code E1	Water inlet	Check water supply; ensure tap is open; check inlet hose.
Error code E2	Water drainage	Check drain hose; clean filter; check for blockages.
Leaking water	Hose connections	Check all hose connections; ensure proper installation.
Noise during operation	Spray arms/items	Ensure spray arms rotate freely; check for items touching spray arms.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model and serial numbers ready.