Beko Dishwasher DEN48520GB Manual

The Beko DEN48520GB is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and multiple wash programs. It features a digital display, delay timer, half-load option, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (Energy Efficient)
Programs	Auto, Intensive, Eco, Quick, Delicate, Glass
Digital Display	Shows remaining time, program, and status icons
Delay Timer	Delay start up to 24 hours
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	Lights alert when refill is needed
AquaStop	Leak protection system
Adjustable Upper Basket	Height can be adjusted for taller items

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Position dishwasher: Leave minimum clearance as specified in manual.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet. Do not use extension cord.
Level the appliance: Adjust feet until dishwasher is stable.

WARNING! Installation must comply with local regulations. If unsure, hire a qualified technician.

First-Time Setup

Before first use, remove transport materials and prepare the dishwasher.

Remove packaging: Take off all tapes and polystyrene blocks.
Fill salt container: Add 1.5 kg of dishwasher salt (only for models with water softener).
Fill rinse aid dispenser: Fill to MAX line with rinse aid.
Run initial cycle: Run an empty wash with detergent on the Intensive program.
Set water hardness: Use the salt consumption setting according to your local water hardness.

CAUTION! Only use salt specifically designed for dishwashers. Do not use table salt.

Specifications

Model: DEN48520GB
Type: Freestanding Dishwasher
Capacity: 14 Standard Place Settings
Energy Class: A++
Water Consumption: Approx. 10 Liters per Cycle (Eco Program)
Power Consumption: Approx. 0.78 kWh per Cycle (Eco Program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V ~ 50Hz
Max Inlet Water Pressure: 1 MPa (10 bar)
Min Inlet Water Pressure: 0.03 MPa (0.3 bar)

Controls and Settings

Control Panel: ON/OFF button, Program Selection buttons, Delay Start, Half Load, Start/Pause, Child Lock.

Program Guide:

Program	Description	Temp (°C)	Duration
Auto	Automatically adjusts to soil level	45-65	1:45-2:30
Intensive	For heavily soiled pots/pans	70	2:05
Eco	Energy-saving for normally soiled	50	2:50
Quick	For lightly soiled, quick wash	45	0:29
Delicate	For fragile glass and china	40	1:40
Glass	For glasses and cups	40	0:45

Settings: Delay Start (1-24 hrs), Half Load (for lower basket only), Child Lock (press and hold Start/Pause for 3 sec).

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues before loading.
Upper basket: For glasses, cups, saucers, and small plates.
Lower basket: For plates, pots, pans, and larger items.
Cutlery basket: Place knives pointing down, spoons and forks mixed.
Adjust upper basket: Lift to higher position for taller items in lower basket.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Place heavily soiled items facing the center. Do not overload.

Using Detergents & Additives

Use only detergents and additives designed for dishwashers.

Detergent: Fill main detergent dispenser according to water hardness and soil level. Use tablets, powder, or gel.
Rinse Aid: Essential for spot-free drying. Refill when indicator light comes on.
Salt: Required for models with built-in water softener. Refill when salt indicator lights up.
Pre-wash detergent: For heavily soiled loads, add a small amount to the pre-wash chamber.

WARNING! Do not mix different types of detergent. Store in a cool, dry place.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Clean filters: Remove and rinse under tap weekly.
Clean spray arms: Check for blockages monthly.
Clean door seal: Wipe with damp cloth to remove residue.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months if in hard water area.
Exterior: Clean with mild soap and damp cloth. Do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not use steam cleaners.

Safety Information

Read all instructions before use.

This appliance is for household use only.
Do not wash items soiled with flammable substances.
Do not open door during high-temperature programs.
Keep children away from detergent and open door.
Disconnect power before servicing.
Do not sit or stand on the open door.
Only use accessories recommended by the manufacturer.

For electrical safety, ensure proper grounding.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	No power, door not closed	Check plug/power; ensure door is firmly closed.
Poor cleaning results	Overloaded, wrong program, clogged filter	Load correctly; select suitable program; clean filter.
Water not draining	Drain hose kinked/clogged	Check hose; clean filter; ensure drain height is correct.
Leaking water	Door seal damaged, hose loose	Check seal; tighten hose connections; ensure unit is level.
Noise during operation	Spray arm hitting items, foreign object	Rearrange load; check for small objects in pump.
Salt/Rinse Aid light on	Container empty	Refill salt or rinse aid as needed.
Display shows error code	Various faults	Consult error code table in manual. Common: E1 (water inlet), E2 (drain), E3 (heating).

Reset: Turn off at mains for 2 minutes, then restart.

Service: For persistent issues, contact Beko Authorized Service: 0333 207 9710 (UK) or visit www.beko.co.uk