beko dishwasher DEN48520XAD manual

The Beko DEN48520XAD is a freestanding dishwasher with a 12-place setting capacity, featuring an A++ energy rating, 5 wash programs, delay timer, child lock, and salt/low rinse aid indicators. It operates on 220-240V~ 50Hz with a maximum power consumption of 2100W. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

Feature	Description
Energy Rating	A++ for high energy efficiency
Capacity	12 standard place settings
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Auto
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Half Load Option	Saves water and energy for smaller loads
Acoustic Signal	Audible alert when cycle ends
Display	Digital display showing remaining time and program status

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or dedicated drain pipe (height 40-100 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power outlet.

WARNING! Ensure water and electrical connections are secure to prevent leaks or electric shock. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging from interior and baskets.
Fill salt container: Unscrew cap, add 1 kg of special dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX mark, close lid.
Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher salt in the softener. Do not use table salt.

Specifications

Model: DEN48520XAD
Type: Freestanding dishwasher
Capacity: 12 place settings
Energy Rating: A++
Water Consumption: Approx. 9.5 liters per cycle (Eco program)
Power Supply: 220-240V~ 50Hz
Power Consumption: 0.78 kWh per cycle (Eco program), max 2100W
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Net Weight: 44 kg

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION knob, DELAY START button, HALF LOAD button, CHILD LOCK button, START/PAUSE button.

Programs: Intensive (70°C), Eco (50°C), Quick (45 min), Glass (40°C), Auto (sensor-based).

Settings: Use PROGRAM knob to select cycle. Press DELAY to set start time (1-24h). HALF LOAD reduces water for smaller loads. CHILD LOCK activates by holding button for 3 seconds. Display shows remaining time, salt/rinse aid indicators, and program status.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: For plates, pots, pans. Adjust height if needed.
Upper basket: For glasses, cups, small bowls. Fold-down cup shelves for stemware.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Ensure spray arms can rotate freely; do not block with large items.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill dispenser in door according to soil level (25 ml for normal, 30 ml for heavy). Use tablets or powder.
Rinse Aid: Refill when indicator light comes on. Adjust dosage via dial inside dispenser (1-6).
Salt: Refill when salt indicator illuminates. Use only regenerating salt for dishwashers.
Combined detergents (3-in-1): Can be used; follow manufacturer instructions.

WARNING! Do not use regular washing-up liquid. Keep detergents out of reach of children.

Care & Cleaning

Regular maintenance ensures longevity.

Clean exterior: Wipe with damp cloth and mild detergent.
Clean interior: Remove and rinse filter weekly under running water.
Clean spray arms: Check for blockages; remove debris from holes.
Run empty hot cycle monthly with dishwasher cleaner or vinegar to remove grease.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or scouring pads.

Safety Features

Child Lock: Locks control panel to prevent changes. Door Safety: Door automatically stops if opened during operation; cycle pauses. Overflow Protection: Float switch stops water intake if detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check plug and power; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Rearrange dishes; check spray arms for blockages; use correct detergent amount.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height is correct.
Leaking water	Hose connections	Tighten inlet and drain hose connections; check door seal for debris.
Unusual noise	Foreign objects	Check for small items interfering with spray arm rotation.
Salt indicator stays on	Salt container empty	Refill salt container; run a short program to flush salt into softener.

Reset: Turn off power for 5 minutes, then restart.

Service: Contact authorized Beko service; do not attempt repairs yourself.