Beko Dishwasher DFN 1503 Manual

The Beko DFN 1503 is a freestanding dishwasher with a 12-place setting capacity, featuring 6 wash programs, an A++ energy rating, and a 50 dB noise level. It includes a digital display, delay start, half-load option, child lock, and salt/rinsing aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, filters, salt container, and water inlet/outlet connections.

Feature	Description
Capacity	12 standard place settings
Energy Rating	A++ (energy efficient)
Noise Level	50 dB (quiet operation)
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, etc.
Digital Display	Shows program duration, delay time, and error codes
Delay Start	Program start delay up to 24 hours
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	Lights alert when refills are needed
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is near water supply, drain, and power outlet.

Position dishwasher: Place on level floor near sink area.
Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Secure to sink drain or standpipe (height 40-100 cm).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet to ensure stability.

WARNING! Ensure water and electrical connections are secure to prevent leaks or shocks. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging inside baskets.
Fill salt container: Add dishwasher salt to softener unit (first use only).
Fill rinse aid: Pour into dispenser until MAX indicator.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: DFN 1503
Type: Freestanding dishwasher
Capacity: 12 place settings
Energy Class: A++
Water Consumption: Approx. 11 liters per cycle (Eco program)
Power Consumption: 0.93 kWh per cycle (Eco program)
Noise Level: 50 dB
Programs: 6 (Intensive, Eco, Quick 30', Glass, 90', Soak)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 42 kg
Power Supply: 220-240V, 50Hz, 10A

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION buttons, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Icons: Program duration, delay timer, salt/rinse aid indicators, end cycle signal.

Program Selection: Intensive (70°C), Eco (50°C), Quick 30' (45°C), Glass (40°C), 90' (65°C), Soak (pre-wash). Settings: Delay start (1-24 hrs), half load (for lower basket only), child lock (press 3 sec to activate).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Upper basket: Cups, glasses, small plates (face downward).
Lower basket: Plates, pots, pans (avoid blocking spray arms).
Cutlery basket: Place knives, forks, spoons with handles down.
Add detergent: Use powder, tablets, or gel in dispenser.

Tip: Do not overload; ensure water spray can reach all items.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Select program: Press PROGRAM button until desired program lights.
Optional settings: Set DELAY START or HALF LOAD if needed.
Start: Press START/PAUSE; door locks automatically.
After cycle: Wait for END signal; open door slightly to let steam escape.
Unload: Start with lower basket to avoid dripping.

WARNING! Do not open door during wash cycle; hot steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove and rinse under tap weekly.
Check spray arms: Ensure holes are not clogged.
Refill salt: When salt indicator lights, add to container (approx. every 2 months).
Refill rinse aid: When indicator lights, fill to MAX line.
Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Use only recommended cleaning agents.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power supply/door	Check plug and power; ensure door is closed properly.
Poor washing results	Loading/detergent	Rearrange dishes; use correct detergent amount; clean filters.
Water not draining	Drain hose clogged	Check hose for kinks; clean filter; ensure drain height correct.
Error code on display	Various faults	Refer to manual error code list; reset by turning off/on.
Leaking water	Hose connections	Tighten inlet/drain hoses; check door seal for damage.

Reset: Turn off power for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com