beko dishwasher DFN 2531 S manual

The Beko DFN 2531 S is a freestanding dishwasher with a 13-place setting capacity, featuring 6 wash programs, an A++ energy rating, and a 48 dB noise level. It includes a digital display, half-load function, adjustable upper basket, salt and rinse aid indicators, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Upper and lower baskets, Cutlery basket, Filter system, Salt and rinse aid compartments, Water inlet and drain hoses.

FeatureDescription
Capacity13 standard place settings
Energy RatingA++ (Energy Efficient)
Noise Level48 dB (Quiet Operation)
Wash Programs6 programs including Intensive, Eco, and Quick wash
Half Load FunctionFor washing fewer dishes, saving water and energy
Digital DisplayShows program duration, remaining time, and status
Adjustable Upper BasketHeight can be adjusted for taller items
Salt & Rinse Aid IndicatorsLights alert when refills are needed
Child LockPrevents accidental program changes
Delay StartProgram can be delayed up to 24 hours

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

  1. Connect water inlet: Attach supplied hose to cold water tap (15-100°C max).
  2. Connect drain hose: Place hose into sink or standpipe (min 40 cm, max 100 cm height).
  3. Level the appliance: Adjust feet to ensure dishwasher is stable and level.
  4. Plug into grounded power outlet.

WARNING! Only connect to cold water. Ensure electrical socket is easily accessible. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Fill salt dispenser: Remove lower basket, twist cap open, fill with special dishwasher salt (first use may require 1.5L water).
  2. Fill rinse aid dispenser: Open compartment on door, fill to MAX line with rinse aid.
  3. Run an empty wash: Select the Intensive program without dishes to clean interior.
  4. Load detergent: Use powder, tablets, or gel in the dispenser on the door.

CAUTION! Only use salt and rinse aid designed for dishwashers. Do not mix detergent types.

Specifications

Controls and Settings

Access controls via the panel on the top of the door.

Buttons: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: INTENSIVE (70°C, for heavily soiled), ECO (50°C, energy saving), QUICK 30' (light soil), GLASS (40°C, delicate), AUTO (sensors adjust), RINSE (no detergent). Settings: Delay Start (1-24h), Half Load (for one basket), Child Lock (press 3 sec), Salt/Rinse Aid indicator lights.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; pre-rinsing is not necessary.
  2. Lower basket: For pots, pans, plates, and larger items.
  3. Upper basket: For glasses, cups, saucers, and smaller plates.
  4. Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
  5. Adjust upper basket: Lift sides to raise/lower for taller items.

Tip: Do not overload. Ensure spray arms can rotate freely. Place delicate items in upper basket.

Using Wash Programs

Select program based on soil level and dish type.

  1. Load dishes and close door securely.
  2. Add detergent to dispenser.
  3. Press POWER to turn on.
  4. Select PROGRAM with arrow buttons.
  5. Optional: Set DELAY START or HALF LOAD.
  6. Press START/PAUSE. The display shows remaining time.
  7. At end of cycle, a beep sounds. Wait a few minutes before opening to avoid steam.

WARNING! Only open door during cycle if necessary (press START/PAUSE first). Use only dishwasher-safe detergents.

Care & Maintenance

Regular maintenance ensures performance and longevity.

  1. Clean filter: Twist and lift out filter assembly weekly, rinse under tap.
  2. Clean spray arms: Remove and check for blockages monthly.
  3. Check salt level: Refill when indicator light comes on (use approx. 1kg salt).
  4. Check rinse aid: Refill when indicator light comes on.
  5. Wipe door seals and interior with damp cloth.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners or solvents.

Safety Information

Read all instructions before use. Keep children away from open door and detergent compartment. Do not wash items soiled with flammable substances. Ensure door is not left open as a tripping hazard. The appliance must be grounded.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower, door, child lockCheck plug, fuse, and power. Ensure door is closed properly. Check if Child Lock is activated.
Poor washing resultsLoading, detergent, filterCheck loading, use correct detergent amount, clean filter, ensure spray arms are not blocked.
Water not drainingDrain hose, filter blockageCheck drain hose for kinks. Clean filter. Ensure sink standpipe is not blocked.
Salt indicator light onLow saltRefill salt dispenser.
Unusual noiseSpray arm, foreign objectCheck for items obstructing spray arm rotation. Remove any foreign objects from pump area.
Leaking waterDoor seal, hose connectionsCheck door is closed and seal is clean. Tighten water inlet and drain hose connections.

Reset: Turn off power at socket for 5 minutes, then restart.

Service: For persistent issues, contact authorized Beko service. Model number: DFN 2531 S. Serial number located on door edge or rating plate.

beko dishwasher DFN 2531 S manual © - All Rights Reserved 2025