Beko Dishwasher DFN 28432 X Manual

The Beko DFN 28432 X is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 50 dB noise level, and multiple wash programs including Eco, Intensive, and Quick Wash. It includes a digital display, delay timer, half-load option, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filters, and inlet/drain hoses.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (Energy Efficient)
Noise Level	50 dB (Quiet Operation)
Digital Display	Shows program, time remaining, and status
Wash Programs	Eco, Intensive, Quick, Glass, Auto
Delay Timer	Program start delay up to 24 hours
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	Lights alert when refill is needed
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water inlet: Attach supply hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure stability.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Do not kink hoses. Ensure electrical socket is accessible after installation.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, then refill with water.
Fill rinse aid dispenser: Open compartment on door, fill to MAX line with rinse aid.
Run empty wash: Select Intensive program without dishes to clean interior.
Load detergent: Use powder or tablets in dispenser as per program.

CAUTION! Only use dishwasher-specific salt and rinse aid. Do not mix with detergent.

Specifications

Type: Freestanding Dishwasher.
Capacity: 14 place settings.
Energy Consumption: 0.95 kWh per cycle (Eco program).
Water Consumption: 10.5 liters per cycle (Eco program).
Programs: Eco (50°C), Intensive (70°C), Quick (58°C), Glass (40°C), Auto.
Special Functions: Delay Start (1-24h), Half Load, Child Lock.
Power Supply: 220-240V, 50Hz.
Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Program Guide: Eco (3h10min, 0.95 kWh), Intensive (2h45min, 1.2 kWh), Quick (1h, 0.8 kWh), Glass (1h20min, 0.7 kWh), Auto (senses soil, adjusts time/temp).

Settings: Use PROGRAM SELECTOR to choose cycle. DELAY START sets start time. HALF LOAD reduces resource use for smaller loads. CHILD LOCK activated by holding for 3 seconds. Display shows remaining time, program stage, and salt/rinse aid alerts.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans (face center).
Upper basket: Glasses, cups, small bowls (angled down).
Cutlery basket: Forks, knives, spoons (handles down).
Ensure items do not block spray arms or detergent dispenser.

Tip: Do not overload. Place delicate items in upper basket.

Using Wash Programs

Select program based on load type and soil level.

Load dishes and close door securely.
Add detergent to dispenser (check compartment is dry).
Select program via PROGRAM SELECTOR.
Optional: Set DELAY START or HALF LOAD.
Press START/PAUSE to begin cycle.
Cycle ends with beep; open door slightly to allow steam escape.
Unload lower basket first to avoid dripping.

WARNING! Do not open door during hot wash phases. Use handle to avoid steam burns.

Care & Maintenance

Regular maintenance ensures performance and longevity.

Clean filters weekly: Remove lower basket, twist out filter assembly, rinse under tap.
Check spray arms monthly: Ensure holes are clear of debris.
Wipe door seals and interior with damp cloth.
Descale every 3 months: Run empty with a dishwasher cleaner or vinegar.
Refill salt when indicator lights (approx. every 20 cycles).
Refill rinse aid when indicator lights (adjust dosage via dial inside compartment).

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open door and detergent.
Use only dishwasher-safe detergents, salt, and rinse aid.
Do not operate if hose is damaged or door does not seal.

WARNING! Risk of electric shock. Do not immerse appliance in water.

Regulatory Information

This appliance complies with EU Directive 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste disposal: Follow local regulations; do not dispose with household waste. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug, fuse, power supply; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Rearrange load; ensure spray arms rotate freely; use correct detergent amount.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks; ensure waste pipe is not blocked.
Salt indicator stays on	Salt level	Refill salt container; run a short program to allow salt to dissolve.
Unusual noise	Spray arm/items	Check for items touching spray arm; ensure dishes are securely placed.
Leaking water	Hose/door seal	Tighten hose connections; inspect door seal for damage; ensure unit is level.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service: www.beko.com/support.