beko dishwasher DFN 6833 manual

The Beko DFN 6833 is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 6 wash programs, digital display, delay timer, child lock, half-load option, and AquaIntense technology for improved cleaning performance. It includes a cutlery basket, adjustable upper basket, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, inlet hose, drain hose, and filter system.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (Energy Efficient)
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, etc.
Digital Display	Shows program duration, delay time, and status icons
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Reduces water and energy for smaller loads
AquaIntense Technology	Enhanced spray arm system for better cleaning
Salt & Rinse Aid Indicators	LED alerts for refilling
Adjustable Upper Basket	Height adjustable for taller items

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or standpipe (min height 40 cm).
Level the appliance: Adjust feet using a spanner for stability.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Dishwasher is heavy; lift with care. Ensure all connections are secure and leak-free.

First-Time Setup

Before first use, run a wash cycle without dishes.

Fill salt container: Remove lower basket, unscrew cap, fill with dishwasher salt (first use: add 1 litre water).
Fill rinse aid dispenser: Open lid, fill to MAX line, close lid.
Add detergent: Use powder or tablet in dispenser drawer.
Select program: Choose Intensive or Eco program for initial run.
Start cycle: Close door, press Start/Pause button.

CAUTION! Only use dishwasher-specific salt, rinse aid, and detergent.

Specifications

Model: DFN 6833
Type: Freestanding Dishwasher
Capacity: 14 place settings
Energy Class: A++
Water Consumption: Approx. 10 litres per cycle (Eco program)
Power Consumption: Approx. 0.95 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Programs: 6 (Intensive, Eco, Quick 30', Glass, 90', Soak)

Controls and Settings

Control Panel: Power On/Off, Program Selection buttons, Delay Timer, Start/Pause, Half Load, Child Lock.

Programs: Intensive (70°C), Eco (50°C), Quick 30' (45°C), Glass (40°C), 90' (65°C), Soak (pre-wash).

Settings: Delay Timer (1-24 hours), Child Lock (press and hold Half Load for 3 seconds), Half Load (reduces consumption for smaller loads). Display: Shows remaining time, program icon, delay time, salt/rinse aid indicators.

Loading the Dishwasher

Load dishes according to basket layout for optimal cleaning.

Lower basket: Plates, pots, pans, larger items.
Upper basket: Glasses, cups, saucers, small bowls.
Cutlery basket: Knives, forks, spoons, utensils (handles down).
Adjust upper basket: Lift to higher position for tall items.

Tip: Do not overload; ensure spray arms can rotate freely. Scrape off large food residues before loading.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Fill main wash and pre-wash compartments if needed.
Select program: Press Program button until desired program lights up.
Set delay (optional): Press Delay Timer to set start time.
Start cycle: Close door firmly, press Start/Pause.
Pause/change: Press Start/Pause to halt; change program if door closed less than 1 minute.
End of cycle: Display shows "0:00"; door unlocks after a short cooling period.

WARNING! Do not open door during hot wash phases; risk of steam burns.

Care & Maintenance

Regular maintenance ensures optimal performance.

Clean filter: Remove lower basket, twist filter assembly, rinse under tap weekly.
Check spray arms: Ensure holes are not clogged; rotate manually.
Refill salt: When salt indicator lights, add salt to container (only for hard water areas).
Refill rinse aid: When rinse aid indicator lights, fill dispenser.
Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not run dishwasher without filter.

Safety Information

Read all instructions before use. Keep children away from open door and detergent. Only use detergent for dishwashers. Do not wash items soiled with flammable substances. Ensure door is closed during operation. Disconnect power before servicing.

Regulatory Information

CE marked; complies with EU directives. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact your local Beko service centre.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check plug, fuse; ensure door closed properly; disable child lock.
Poor washing results	Loading, detergent, filter	Load correctly; use fresh detergent; clean filter; check spray arms.
Water not draining	Drain hose, filter blockage	Check hose for kinks; clean filter; ensure drain height correct.
Leaking water	Hose connections, door seal	Tighten inlet/drain hoses; check door seal for debris/damage.
Unusual noise	Spray arm, foreign objects	Ensure spray arms rotate freely; check for small objects in pump.
Salt/Rinse Aid indicator on	Low level	Refill salt container or rinse aid dispenser.

Reset: Unplug for 5 minutes, then reconnect.

Service: Contact authorized Beko service; www.beko.com