Beko Dishwasher DFN 71046 X30 Manual

The Beko DFN 71046 X30 is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, 52 dB noise level, and multiple wash programs. It features a stainless steel interior, digital display, delay timer, child lock, half-load option, and salt/rinse aid indicators. This manual covers safety instructions, installation, program selection, daily use, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, detergent dispenser, salt container, rinse aid dispenser.

FeatureDescription
Capacity14 place settings
Energy RatingA++ (Energy Efficient)
Noise Level52 dB (Quiet Operation)
DisplayDigital with remaining time indicator
ProgramsAuto, Intensive, Eco, Quick, Glass, Half Load
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Water SoftenerAdjustable with salt container
Rinse Aid IndicatorAlerts when refill needed
Dimensions (HxWxD)85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
  3. Level the appliance: Adjust feet until dishwasher is stable.
  4. Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Take out all brackets and tapes inside.
  2. Fill salt container: Unscrew cap, add 1 kg of dishwasher salt, then refill with water.
  3. Fill rinse aid: Open dispenser, fill to MAX line, close securely.
  4. Run empty wash: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Adjust softener dial according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not mix with detergent.

Specifications

Controls and Settings

Control Panel: ON/OFF button, Program selector, Delay timer, Start/Pause, Half Load, Child Lock.

Programs: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse.

Options: Delay (1-24h), Half Load (for fewer dishes), Extra Dry (increases drying temperature), Child Lock (press 3 sec to activate).

Indicators: Salt warning light, Rinse aid warning light, Program progress lights.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues (no pre-rinsing needed).
  2. Load lower basket: Pots, pans, plates (facing center).
  3. Load upper basket: Glasses, cups, small plates.
  4. Cutlery basket: Place knives pointing down, mixed for separation.
  5. Ensure spray arms rotate freely and items don't block detergent dispenser.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Wash Programs

Select program based on soil level and dish type.

  1. Turn on: Press ON/OFF button.
  2. Load detergent: Add to main wash compartment (20-25g powder or 1 tablet).
  3. Select program: Turn selector to desired program.
  4. Add options: Press Half Load, Delay, or Extra Dry if needed.
  5. Start: Press Start/Pause. Display shows remaining time.
  6. After cycle: Wait for door to unlock automatically (approx. 2 min after end).

WARNING! Use only dishwasher detergents. Do not open door during hot cycles.

Care & Maintenance

Regular maintenance ensures longevity.

  1. Clean filter weekly: Remove lower basket, twist filter assembly, rinse under water.
  2. Check spray arms monthly: Remove and clear any debris from holes.
  3. Refill salt: When indicator lights, add 1 kg dishwasher salt to container.
  4. Refill rinse aid: When indicator lights, fill to MAX line.
  5. Clean exterior: Use damp cloth with mild detergent. Never use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not touch heating element.

Safety Information

Read all safety instructions before use.

WARNING! Risk of electric shock if used improperly. Contact qualified technician for repairs.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed with household waste. Please recycle according to local regulations. For EU product database: https://eprel.ec.europa.eu. Beko is a registered trademark of Arçelik A.Ş. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower/doorCheck power connection; ensure door is closed properly.
Poor cleaning resultsLoading/filter/detergentCheck loading; clean filter; use correct detergent amount.
Water not drainingDrain hose/filterCheck hose for kinks; clean filter; ensure drain height min 40 cm.
Salt indicator onSalt lowRefill salt container; check water hardness setting.
Noise during operationSpray arm/itemsCheck for items touching spray arm; clear debris from spray arm holes.
Leaking waterHoses/door sealTighten connections; check door seal for damage; ensure dishwasher is level.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service: www.beko.com/support

Beko Dishwasher DFN 71046 X30 Manual © - All Rights Reserved 2025