Beko Dishwasher DFN05210W Manual

The Beko DFN05210W is a freestanding dishwasher with a 10-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, half-load option, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, digital display, and control panel.

Feature	Description
Capacity	10 place settings
Energy Rating	A++
Wash Programs	Auto, Intensive, Eco, Quick, Glass, 90 Min
Delay Start	1-24 hours
Half Load	Option for smaller loads
Child Lock	Prevents accidental program changes
Digital Display	Shows remaining time, program, and status
Salt & Rinse Aid Indicators	Alerts when refills are needed
Water Softener	Adjustable for different water hardness
Acoustic Signal	Optional end-of-cycle beep

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (min 40 cm, max 100 cm from floor).
Level the appliance: Adjust feet to ensure stability.
Plug into grounded power outlet.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without dishes.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, fill with water.
Fill rinse aid dispenser: Open lid, fill to MAX line, close securely.
Set water hardness: Use program button combination to set level (see manual).
Run initial cycle: Select Intensive program at highest temperature without dishes.

CAUTION! Only use dishwasher-specific salt and rinse aid.

Specifications

Model: DFN05210W
Type: Freestanding
Capacity: 10 place settings
Energy Consumption: 0.92 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V ~ 50Hz
Power: 2000 W
Inlet Water Pressure: 0.03 - 1 MPa

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), 90 Min (65°C).

Settings: Delay Start (1-24h), Half Load (reduces water/energy), Child Lock (hold 3 sec to activate), Acoustic Signal (on/off via button combination). Display shows: selected program, remaining time, salt/rinse aid alerts, error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues.
Load lower basket: Pots, pans, plates (facing center).
Load upper basket: Glasses, cups, small plates.
Cutlery basket: Place handles down, mixed types.
Ensure spray arms rotate freely.

Tip: Do not overload; water must reach all surfaces.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main dispenser (15-25g depending on soil). Use tablets for convenience.
Rinse Aid: Adjust dispenser setting (1-6) based on water spots.
Salt: Refill when indicator lights; prevents limescale.
Combination detergents: May contain salt/rinse aid; check manufacturer instructions.

WARNING! Do not use regular washing powder or liquid soap.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist out filter assembly, rinse under water weekly.
Clean spray arms: Check for blockages, remove debris.
Wipe door seals: Use damp cloth to remove residue.
Descale: Run empty cycle with citric acid or dishwasher cleaner monthly if in hard water area.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open door (hot surfaces). Do not sit or stand on open door. Only use accessories recommended by manufacturer. Disconnect power before servicing.

Electrical Safety: Ensure proper grounding. Do not operate if cord or plug is damaged.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check plug, ensure door closed, deactivate child lock.
Poor cleaning results	Loading, filters, detergent	Improve loading, clean filters, use correct detergent amount.
Water not draining	Drain hose, filter blockage	Check hose for kinks, clean filter, ensure proper installation height.
Error code E1	Water inlet problem	Check water tap, inlet hose, filter.
Error code E3	Heating issue	Check heating element, temperature sensor.
Leaking	Door seal, hose connections	Check seal for debris, tighten connections.
Noisy operation	Spray arm, foreign objects	Check for obstruction in spray arms, ensure dishes not touching.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. UK: 0333 207 9710. IE: 01 862 3415.