beko dishwasher DFN05313X manual

The Beko DFN05313X is a freestanding dishwasher with a 13-place setting capacity, featuring 6 wash programs, A++ energy rating, digital display, delay timer, child lock, half-load option, and AquaIntense technology for improved cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Digital display, control panel, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filter system, and AquaIntense spray arm.

FeatureDescription
Capacity13 place settings
Energy RatingA++
Wash Programs6 programs including Intensive, Eco, Quick, Glass, etc.
Digital DisplayShows program duration, remaining time, and status
Delay TimerProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Half-Load OptionReduces water and energy consumption for smaller loads
AquaIntense TechnologyEnhanced spray system for better cleaning
Filter SystemEasy-clean triple filtration
Dimensions (HxWxD)85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
  3. Level the dishwasher: Adjust feet for stability.
  4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, then refill with water until overflow.
  2. Fill rinse aid dispenser: Open lid, fill to MAX line, close lid.
  3. Load detergent: Add powder or tablet to dispenser (main wash and pre-wash compartments if needed).
  4. Run initial empty cycle: Select Intensive program without dishes to clean interior and remove manufacturing residues.

CAUTION! Use only dishwasher-specific salt, rinse aid, and detergents.

Specifications

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Timer, Start/Pause, Child Lock, Half-Load button.

Display Icons: Program indicator, remaining time, salt warning, rinse aid warning, child lock, delay timer active.

Program Selection: Press PROGRAM button to cycle through options. Delay Timer: Set delay (1-24 hours) before wash starts. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Half-Load: Reduces water use when only one basket is loaded.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: For pots, pans, plates, and larger items.
  3. Upper basket: For glasses, cups, saucers, and smaller dishes.
  4. Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
  5. Ensure items do not block spray arms or detergent dispenser.

Tip: Place heavily soiled items facing the center spray arm for better cleaning.

Wash Programs

Select program based on load type and soil level.

  1. Intensive (70°C): For heavily soiled pots and pans.
  2. Eco (50°C): Energy-efficient for normally soiled dishes (default test cycle).
  3. Quick 30' (55°C): Fast wash for lightly soiled loads.
  4. Glass (40°C): Gentle cycle for glassware and delicate items.
  5. Auto (45-65°C): Automatically adjusts temperature and duration based on soil sensors.
  6. Rinse: Rinse only, no detergent required.

WARNING! Do not open door during wash cycle; steam and hot water may cause injury.

Care & Maintenance

Regular maintenance ensures longevity and performance.

  1. Clean filter: Remove lower basket, twist and lift out filter assembly, rinse under tap weekly.
  2. Check spray arms: Ensure holes are not clogged; rotate freely.
  3. Refill salt: When salt warning light appears (approx. every 20 cycles).
  4. Refill rinse aid: When rinse aid warning light appears.
  5. Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug dishwasher before cleaning interior components.

Safety Information

Read all instructions before use. Keep children away from open door and detergent compartment. Use only detergents and additives designed for dishwashers. Ensure door is closed securely before starting cycle. Do not tamper with safety interlocks.

Electrical Safety: Plug into grounded outlet; do not use extension cords. Disconnect power before servicing.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower supply, door not closedCheck plug and power; ensure door is fully closed and latched.
Poor cleaning resultsSpray arms blocked, incorrect loadingClean spray arm holes; rearrange dishes to allow water flow.
Water not drainingFilter clogged, drain hose kinkedClean filter; check drain hose for obstructions/kinks.
Salt warning light onSalt container emptyRefill with dishwasher salt; run short rinse cycle.
Unusual noiseForeign object in pump/spray armCheck for small items (bones, pits); remove if found.
Leaking waterHose connections loose, door seal damagedTighten inlet/drain hoses; inspect and clean door seal.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center or visit www.beko.com for support.

beko dishwasher DFN05313X manual © - All Rights Reserved 2025