Beko Dishwasher DFN16420W Manual

The Beko DFN16420W is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and 5 wash programs. It features a digital display, delay timer, half-load option, child lock, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, filter system, salt and rinse aid dispensers, inlet and drain hoses.

FeatureDescription
Capacity14 place settings
Energy RatingA++
Wash Programs5 programs including Intensive, Eco, Quick
Digital DisplayShows program duration, delay time, and status
Delay TimerProgram start delay up to 24 hours
Half Load OptionReduces water and energy for smaller loads
Child LockPrevents accidental program changes
Salt & Rinse Aid IndicatorsLights alert when refills are needed
Filter SystemEasy-clean triple filtration
Dimensions (HxWxD)85cm x 60cm x 60cm

Installation

Unpack and inspect contents. Ensure location is level, near water inlet, drain, and power outlet.

  1. Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place into sink or standpipe (min height 40cm, max 100cm).
  3. Level the appliance: Adjust feet to ensure dishwasher is stable and level.
  4. Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Do not bend or kink hoses. Ensure electrical socket is easily accessible. Follow local plumbing regulations.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Take out all packaging and securing brackets inside.
  2. Fill salt dispenser: Unscrew cap, add 1kg of dishwasher salt, then fill with water until it overflows. Tighten cap.
  3. Fill rinse aid dispenser: Open lid, fill to MAX line, close lid.
  4. Run a wash cycle: Select the Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher salt in the salt dispenser. Do not use table salt.

Specifications

Controls and Settings

Access programs and settings via the digital control panel.

Control Panel: POWER ON/OFF, PROGRAM SELECTION knob, DELAY START button, HALF LOAD button, CHILD LOCK button, START/PAUSE button.

Programs: INTENSIVE (70°C), ECO (50°C), NORMAL (65°C), QUICK (45°C), GLASS (40°C). Settings: Delay Start (1-24 hrs), Half Load (for upper basket only), Child Lock (press and hold for 3 sec). Indicators: Salt, Rinse Aid, End of cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: For pots, pans, plates, and larger items.
  3. Upper basket: For glasses, cups, saucers, and smaller plates.
  4. Cutlery basket: Place knives, forks, spoons with handles down.
  5. Ensure items are secure and do not block spray arms.

Tip: Do not overload. Place heavily soiled items facing the center spray arm.

Using Wash Programs

Select program based on soil level and dish type.

  1. Turn on: Press POWER.
  2. Select program: Turn knob to desired program (see program guide).
  3. Add options: Press DELAY START or HALF LOAD if needed.
  4. Start: Close door firmly, press START/PAUSE. Display shows remaining time.
  5. After cycle: Wait for END indicator. Open door slightly to let steam escape, then unload.

Program Guide: Intensive (heavy soil), Eco (normal soil, energy saving), Normal (daily use), Quick (lightly soiled), Glass (delicate items).

Care & Maintenance

Regular maintenance ensures longevity and performance.

  1. Clean filter: Twist and lift out filter assembly weekly, rinse under tap.
  2. Check spray arms: Ensure holes are not clogged; rotate freely.
  3. Refill salt: When salt indicator lights, add dishwasher salt to dispenser.
  4. Refill rinse aid: When rinse aid indicator lights, fill to MAX line.
  5. Clean exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not run dishwasher without filter.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startDoor not closed, no powerEnsure door is firmly closed; check power outlet and fuse.
Poor washing resultsSpray arms blocked, incorrect loadingClean spray arm holes; rearrange dishes to not block arms.
Water not drainingDrain hose kinked, filter cloggedStraighten drain hose; clean filter system.
Salt indicator stays onSalt dispenser emptyRefill with dishwasher salt; run a short program to flush.
Unusual noiseForeign object in pump, dishes touching spray armCheck pump area for debris; reposition dishes.
Leaking waterInlet hose connection loose, door seal damagedTighten hose connections; inspect and clean door seal.

Reset: Turn off power at socket for 2 minutes, then restart.

Service: Contact authorized Beko service. Have model number (DFN16420W) ready.

Beko Dishwasher DFN16420W Manual © - All Rights Reserved 2025