Beko Dishwasher DFN26220X Manual

The Beko DFN26220X is a 60cm wide, freestanding dishwasher with an A++ energy rating, 12 place settings capacity, 6 wash programs, half-load option, delay start timer, child lock, and salt and rinse aid indicators. It features a stainless steel interior, electronic controls, and a digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filter system, and spray arms.

FeatureDescription
Energy RatingA++ for high energy efficiency
Capacity12 standard place settings
Wash Programs6 programs including Intensive, Eco, and Quick wash
Half Load OptionReduces water and energy for smaller loads
Delay StartTimer to delay program start up to 24 hours
Child LockPrevents accidental program changes
Digital DisplayShows remaining time, program, and status
Salt & Rinse Aid IndicatorsLights alert when refills are needed
Stainless Steel InteriorDurable and hygienic
AquaStopProtection against water leaks

Installation

Unpack and inspect contents. Ensure location is level, near water supply, drain, and power outlet.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Ensure proper height (min 40 cm, max 100 cm from floor) to prevent siphoning.
  3. Level the appliance: Adjust feet to ensure dishwasher is stable and door closes properly.
  4. Plug into grounded power outlet.

WARNING! Installation must comply with local regulations. Only use specified hoses. Do not kink hoses.

First-Time Setup

Before first use, remove all packaging and prepare the dishwasher.

  1. Fill salt container: Open cap, add 1 litre of water, then fill with dishwasher salt (only for first use).
  2. Fill rinse aid dispenser: Open lid, fill to MAX line, close securely.
  3. Run an empty wash: Select the Intensive program without dishes to clean interior and remove manufacturing residues.
  4. Load detergent: Add powder or tablet to the main wash compartment of the dispenser.

CAUTION! Only use dishwasher salt in the dedicated softener unit. Do not use table salt.

Specifications

Controls and Settings

Access functions via the electronic control panel. Buttons: POWER ON/OFF, PROGRAM SELECTION, HALF LOAD, DELAY START, CHILD LOCK, START/PAUSE.

Display Symbols: Program indicator, remaining time, salt warning, rinse aid warning, child lock active.

Program Selection: Press repeatedly to cycle through Intensive, Eco, Normal, Quick (58 min), Glass, Rinse. Settings: Use HALF LOAD for fewer dishes. Use DELAY START to set start time (1-24 hrs). Activate CHILD LOCK by pressing and holding for 3 seconds.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower Basket: For pots, pans, plates, and larger items.
  3. Upper Basket: For glasses, cups, saucers, and smaller plates.
  4. Cutlery Basket: Place knives, forks, spoons with handles down for safety.
  5. Ensure items are secure, not blocking spray arms, and water can reach all surfaces.

Tip: Do not overload. Place delicate items in the upper basket. Check that spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

  1. Intensive: For heavily soiled pots and pans (70°C).
  2. Eco: For normally soiled dishes, energy efficient (50°C).
  3. Normal: Daily wash for standard soiling (65°C).
  4. Quick 58': For lightly soiled loads, quick cycle.
  5. Glass: For fragile glassware and crystal (40°C).
  6. Rinse: Rinse only, no detergent, for items to be washed later.

To start: Close door firmly, select program, add detergent, press START/PAUSE. The door locks and display shows remaining time.

WARNING! Only open door after cycle ends and lock symbol disappears. Steam may be hot.

Care & Maintenance

Regular maintenance ensures performance and longevity.

CAUTION! Unplug before any maintenance. Do not use steam cleaners.

Safety Information

Read all instructions before use.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). The symbol on the product or packaging indicates that this product must not be disposed of with other household waste. For proper treatment, recovery, and recycling, please take it to an approved collection point. For more information, contact your local council or retailer. Manufacturer: Beko plc, 1 Greenhill Crescent, Watford, WD18 8QU, UK. For support, visit www.beko.co.uk or contact 0333 207 9710.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher does not startPower, door, child lockCheck plug, fuse, and power. Ensure door is closed properly. Check if child lock is activated.
No water intakeTap, filter, hoseEnsure water tap is open. Check inlet hose for kinks. Clean inlet filter.
Water not drainingDrain hose, filter blockageCheck drain hose height and for kinks. Clean filter system.
Poor washing resultsLoading, detergent, spray armsDo not overload. Use correct amount of fresh detergent. Ensure spray arms are not blocked.
Salt/Rinse Aid light onLow levelRefill salt container or rinse aid dispenser.
Unusual noiseSpray arm, foreign objectCheck if spray arm is hitting dishes. Check for small objects in pump.

Reset: Turn off power at socket for 2 minutes, then restart.

Service: Do not attempt repairs yourself. Contact authorised service: 0333 207 9710; www.beko.co.uk

Beko Dishwasher DFN26220X Manual © - All Rights Reserved 2025