beko dishwasher DFN26420W manual

The Beko DFN26420W is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 50 dB noise level, and multiple wash programs. It includes a delay timer, child lock, half-load option, and salt/low rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser.

FeatureDescription
Energy RatingA++ for high efficiency
Capacity14 place settings
Noise Level50 dB (quiet operation)
Wash ProgramsAuto, Intensive, Eco, Quick, Glass, Delicate
Delay TimerProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Half Load OptionReduces water and energy for smaller loads
Salt IndicatorAlerts when water softener salt is low
Rinse Aid IndicatorAlerts when rinse aid needs refilling
Digital DisplayShows program status and remaining time

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
  3. Level the dishwasher: Adjust feet to ensure stability.
  4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or electrical hazards. Do not use extension cords.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Take out any brackets or foam inside.
  2. Fill salt container: Unscrew cap, add 1 kg of dishwasher salt, then refill with water until it overflows.
  3. Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX mark, close lid.
  4. Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid; table salt can damage the appliance.

Specifications

Controls and Settings

Access programs via control panel buttons. Display shows selected program, remaining time, and indicators.

Buttons: POWER, PROGRAM (cycle through options), DELAY TIMER (1-24h), HALF LOAD, CHILD LOCK, START/PAUSE.

Program Selection: Auto (senses soil level), Intensive (heavy soil), Eco (energy saving), Quick (light soil), Glass (fragile items), Delicate (plastic). Settings: Delay timer for delayed start; Child lock activates by holding CHILD LOCK for 3 seconds; Half load reduces water use for smaller loads.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: Plates, pots, pans (face inward).
  3. Upper basket: Glasses, cups, small bowls (angled downward).
  4. Cutlery basket: Forks, knives, spoons (handles down; separate silverware to avoid nesting).
  5. Ensure items do not block spray arms.

Tip: Place delicate items in upper basket; avoid overloading.

Using Detergents and Additives

Use only dishwasher-specific products.

  1. Detergent: Fill dispenser with powder, tablet, or gel (check program for amount).
  2. Rinse aid: Refill when indicator light is on; adjust dosage via dial inside dispenser (1-6).
  3. Salt: Refill when salt indicator alerts; use only regenerating salt for dishwashers.
  4. Additives: Do not mix different detergent types; follow manufacturer instructions.

WARNING! Do not use hand soap, laundry detergent, or vinegar; they can damage the appliance.

Care & Cleaning

Regular maintenance ensures longevity.

  1. Clean filters weekly: Remove lower basket, twist out filter assembly, rinse under water.
  2. Wipe door seals and interior monthly with damp cloth.
  3. Clean spray arms: Check for blockages, rinse under water.
  4. Run empty hot cycle with dishwasher cleaner every 2 months.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or scouring pads.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Waste electrical products must not be disposed of with household waste; recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/water supplyCheck plug, fuse, water tap; ensure door is closed properly.
Poor cleaning resultsLoading/detergentRearrange dishes; ensure spray arms rotate freely; use correct detergent amount.
Water not drainingFilter/drain hoseClean filter; check drain hose for kinks; ensure waste pipe is not blocked.
Salt indicator onLow saltRefill salt container; ensure cap is tight.
Unusual noiseForeign objectsCheck for small items in pump or spray arms; remove if found.

Reset: Turn off power for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com

beko dishwasher DFN26420W manual © - All Rights Reserved 2025