The Beko DFN28422W is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, child lock, and half-load option for efficient cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, digital control panel, water inlet/outlet hoses, power cord.
| Feature | Description |
|---|---|
| Capacity | 14 place settings |
| Energy Rating | A++ (Energy Efficient) |
| Wash Programs | Auto, Intensive, Eco, Quick, Glass, Half Load |
| Digital Display | Shows program time, delay start, and status |
| Delay Start | Program start delay up to 24 hours |
| Child Lock | Prevents accidental program changes |
| Half Load Option | Saves water and energy for smaller loads |
| Salt & Rinse Aid Indicators | Alerts when refill is needed |
| AquaStop | Leak protection system |
| Dimensions (HxWxD) | 85cm x 60cm x 60cm |
Unpack and inspect contents. Ensure location is level and near water/drain connections.
WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.
Before first use, run a wash cycle without dishes.
CAUTION! Use only dishwasher-specific salt, rinse aid, and detergent.
Control Panel: POWER, PROGRAM SELECTOR, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.
Program Selection: Turn knob to select program; display shows duration.
Delay Start: Press DELAY button, then use +/- to set hours (1-24).
Half Load: Press button when washing smaller loads (uses less water).
Child Lock: Press and hold for 3 seconds to activate/deactivate.
Salt/Rinse Aid Indicators: Light illuminates when refill is required.
Proper loading ensures optimal cleaning.
Tip: Do not overload; leave space between items for water circulation.
Select program based on soil level and dish type.
| Program | Temperature | Duration | Best For |
|---|---|---|---|
| Auto | 45-65°C | ~105 min | Mixed daily loads |
| Intensive | 70°C | ~150 min | Heavily soiled pots/pans |
| Eco | 50°C | ~180 min | Normally soiled, energy saving |
| Quick | 30°C | 30 min | Lightly soiled, quick wash |
| Glass | 40°C | ~75 min | Glassware, delicate items |
To Start: Close door firmly, select program, press START/PAUSE. Display shows remaining time.
Regular maintenance ensures longevity.
CAUTION! Unplug before cleaning. Do not use abrasive cleaners.
Read all instructions before use.
WARNING! Dishwasher detergents are corrosive; keep out of reach of children.
CE Mark: Complies with EU directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle at designated facility. For EU product database, visit www.eprel.eu. Manufacturer: Beko PLC, UK. For support, visit www.beko.co.uk or contact 0333 207 9710.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Dishwasher won't start | Door not closed, no power | Close door firmly; check power outlet; ensure child lock is off. |
| Poor cleaning results | Overloaded, wrong program, clogged filter | Load properly; select appropriate program; clean filter. |
| Water not draining | Drain hose blocked/kinked | Check hose for obstructions; ensure height >40cm. |
| Leaking water | Hose connections loose, door seal damaged | Tighten connections; inspect and clean door seal. |
| Unusual noise | Spray arm hitting dishes, foreign object | Rearrange load; check for small objects in pump. |
| Salt/Rinse aid light on | Low level | Refill salt and/or rinse aid dispenser. |
| Display shows error code | Various faults | Consult manual; common codes: E1 (water inlet), E2 (drain), E3 (heating). |
Reset: Unplug for 5 minutes, then restart.
Service: 0333 207 9710; www.beko.co.uk