Beko Dishwasher DFN38530X Manual

The Beko DFN38530X is a freestanding dishwasher with a 13-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay timer, child lock, and half-load option. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery tray, detergent dispenser, digital display, control panel.

Feature	Description
Capacity	13 place settings
Energy Rating	A++ (energy efficient)
Wash Programs	8 programs including Eco, Intensive, Quick
Delay Timer	Up to 24 hours delay start
Child Lock	Safety lock for control panel
Half Load Option	Reduces water and energy for smaller loads
Digital Display	Shows program time and status
Salt Indicator	Alerts when water softener needs refill
Rinse Aid Indicator	Alerts when rinse aid is low
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Level the appliance: Adjust feet until dishwasher is stable and level.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not use extension cords. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without dishes.

Remove shipping materials: Take out all tapes and transit bolts.
Fill salt dispenser: Add water softener salt (only for hard water areas).
Fill rinse aid: Pour into compartment until indicator shows full.
Add detergent: Use recommended dishwasher detergent in dispenser.
Select Intensive program and run empty cycle.

CAUTION! Use only dishwasher-specific salt, rinse aid, and detergents.

Specifications

Model: DFN38530X
Type: Freestanding dishwasher
Capacity: 13 place settings
Energy Class: A++
Water Consumption: 10 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB
Programs: 8 (Eco, Intensive, Quick, Glass, Auto, etc.)
Dimensions: 85 x 60 x 60 cm (HxWxD)
Weight: 42 kg
Power Supply: 220-240V, 50Hz

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Icons: Program time, salt indicator, rinse aid indicator, child lock, delay timer.

Program Selection: Eco (energy saving), Intensive (heavily soiled), Quick (lightly soiled), Glass (fragile items), Auto (sensor-based), Hygiene (high temperature), Pre-Rinse (rinse only), Soak (for dried food). Settings: Delay timer (1-24 hours), Child lock (press 3 sec to activate), Half load (reduces consumption), Temperature boost (extra heating).

Loading the Dishwasher

Upper basket: Cups, glasses, small plates. Lower basket: Plates, bowls, pots. Cutlery tray: Knives, forks, spoons.

Scrape off large food residues (no need to pre-rinse).
Load dishes facing center, not touching each other.
Place delicate items in upper basket securely.
Ensure spray arms can rotate freely.

Tip: Refer to loading diagrams in manual for optimal cleaning.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Fill main dispenser (and pre-wash if needed).
Select program: Press PROGRAM button until desired program lights up.
Optional settings: Set delay timer or half load if required.
Start: Press START/PAUSE; door locks automatically.
After cycle: Wait for cycle end beep; open door slightly to let steam escape.
Unload: Start with lower basket to avoid dripping.

WARNING! Do not open door during wash cycle; hot steam may cause burns.

Care & Maintenance

Regular cleaning ensures optimal performance.

Clean filters: Remove and rinse under water weekly.
Clean spray arms: Check for blockages monthly.
Wipe door seals: Use damp cloth to remove residue.
Descale: Run empty cycle with dishwasher cleaner every 2 months.
Check salt and rinse aid: Refill when indicators show low.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open door. Do not wash items soiled with flammable substances. Only use detergents designed for dishwashers. Ensure electrical socket is accessible for disconnection.

Emergency: In case of leak, turn off water supply and disconnect power immediately.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check plug; ensure door is closed properly; press START firmly.
Poor cleaning results	Loading/detergent	Rearrange dishes; use correct detergent amount; clean filters.
Water not draining	Drain hose blocked	Check hose for kinks; clean filter; ensure drain height is correct.
Noise during operation	Foreign objects	Check for small items in spray arms; ensure dishes are not touching spray arms.
Leaking water	Hose connections	Tighten inlet/drain hoses; check door seal for debris.
Salt indicator flashing	Salt low	Refill salt dispenser; run short program to reset.

Reset: Unplug for 5 minutes, then reconnect to reset electronic control.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.