beko dishwasher DFS05013W manual

The Beko DFS05013W is a freestanding dishwasher with a 13-place setting capacity, featuring energy-efficient A++ rating, multiple wash programs, delay start function, child lock, salt and rinse aid indicators, and adjustable upper basket. Designed for standard kitchen installation with dimensions of 60cm width, 85cm height, and 60cm depth. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, detergent dispenser, salt container, rinse aid dispenser.

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1MPa).
2. Connect drain hose: Place in sink or connect to waste pipe (min height 40cm).
3. Level the dishwasher: Adjust feet until machine is stable and level.
4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

1. Fill salt container: Remove lower basket, unscrew cap, fill with special dishwasher salt (first use: add 1L water).
2. Fill rinse aid dispenser: Open compartment on door, fill to MAX line.
3. Select language: Press and hold PROGRAM + DELAY for 3 seconds to set display language.
4. Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Never use table salt.

Specifications

• Model: DFS05013W
• Type: Freestanding dishwasher
• Capacity: 13 place settings
• Energy Class: A++
• Water Consumption: 10L per cycle (Eco program)
• Power Consumption: 0.78 kWh per cycle (Eco program)
• Noise Level: 49 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Voltage/Frequency: 220-240V, 50Hz
• Max Inlet Pressure: 1 MPa (10 bar)
• Min Inlet Pressure: 0.03 MPa (0.3 bar)

Controls and Settings

Control Panel: ON/OFF button, PROGRAM selector, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (70°C), Auto (45-65°C), Eco (50°C), Quick (58°C), Glass (40°C), Pre-Rinse, Delicate, Self-Clean.

Settings: Delay start (1-24h), Child lock (press 3 sec), Salt indicator (flashes when low), Rinse aid indicator (flashes when low). Display shows: program duration, delay time, error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

1. Scrape off large food residues (no pre-rinsing needed).
2. Lower basket: Plates, pots, pans (face center).
3. Upper basket: Glasses, cups, small bowls (angled downward).
4. Cutlery basket: Forks/spoons handle down, knives handle up.
5. Adjust upper basket: Lift both sides to higher position for tall items.
6. Ensure spray arms rotate freely.

Tip: Do not overload. Place delicate items in upper basket only.

Using Wash Programs

Select program based on soil level and dish type.

1. Add detergent: Open dispenser, add powder/tablet to main compartment (liquid to pre-wash if needed).
2. Select program: Turn PROGRAM selector.
3. Optional: Set DELAY START (1-24h) or HALF LOAD.
4. Press START/PAUSE to begin (door locks automatically).
5. Program ends with acoustic signal; wait 2 minutes before opening (steam release).

Program Guide: Intensive (heavily soiled), Eco (daily, energy saving), Quick (lightly soiled), Glass (crystal/glassware), Auto (sensors adjust).

Maintenance

Regular maintenance ensures performance and longevity.

1. Clean filter weekly: Remove lower basket, twist filter assembly counterclockwise, rinse under water.
2. Check spray arms monthly: Remove by pulling upward, clear any debris from holes.
3. Refill salt: When indicator flashes, add salt to container (water may appear in base; normal).
4. Refill rinse aid: When indicator flashes, fill to MAX line.
5. Run Self-Clean monthly: Use empty with dishwasher cleaner or vinegar.

WARNING! Unplug before maintenance. Never run without filter.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean interior with mild detergent.

CAUTION! Do not use abrasive cleaners, solvents, or steam cleaners. Keep control panel dry.

Regulatory Information

CE marked. Complies with EU directives for low voltage, electromagnetic compatibility, and eco-design. Energy label according to EU regulation 1059/2010. Waste electrical products must not be disposed of with household waste. Please recycle. For support, visit www.beko.com or contact local authorized service center.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.