beko dishwasher DFS05024X manual

The Beko DFS05024X is a freestanding dishwasher with 5 wash programs, 10 place settings capacity, A++ energy rating, 49 dB noise level, AquaIntense technology for better cleaning, Half Load option, Delay Start function, child lock, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 8. Care & Cleaning 9. Troubleshooting 10. Technical Data 11. Warranty Information

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, and inlet/drain hoses.

Feature	Description
Wash Programs	5 programs: Intensive, Eco, Normal, Quick, Glass
Capacity	10 standard place settings
Energy Rating	A++ (Energy Efficient)
Noise Level	49 dB (Quiet operation)
AquaIntense Technology	Enhanced spray system for better cleaning results
Half Load Option	Reduces water and energy consumption for smaller loads
Delay Start	Program start delay from 1 to 24 hours
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Display	Digital display showing remaining time and program status

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Position dishwasher: Place in desired location, ensuring leveling feet are adjusted.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (min 40 cm, max 100 cm from floor).
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

Remove transport materials: Take out all packaging from interior and baskets.
Fill salt container: Add special dishwasher salt (first use requires 1.5 kg).
Fill rinse aid dispenser: Pour rinse aid up to MAX mark.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust setting according to local water hardness using program buttons.

CAUTION! Only use dishwasher salt in designated container. Do not use table salt.

Specifications

Model: DFS05024X
Type: Freestanding Dishwasher
Capacity: 10 place settings
Energy Class: A++
Water Consumption: 9.5 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Programs: 5 wash programs + options
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V ~ 50Hz
Inlet Water Pressure: 0.03 - 1 MPa

Controls and Settings

Control Panel: POWER button, Program selection buttons, HALF LOAD button, DELAY START button, CHILD LOCK button, START/PAUSE button.

Program Selection: Press corresponding button for desired program. Display shows duration and options.

Options: HALF LOAD (reduces consumption), DELAY START (1-24 hours delay), CHILD LOCK (press 3 seconds to activate). Settings: Water hardness (1-5 levels), Rinse aid dosage (1-5 levels), acoustic signal on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying results.

Scrape off large food residues before loading.
Upper basket: For glasses, cups, saucers, and small plates.
Lower basket: For plates, pots, pans, and larger items.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Ensure items do not block spray arms and can move freely.

Tip: Refer to loading diagrams on inside of door for optimal arrangement.

Using Detergents and Additives

Use only dishwasher-specific products.

Detergent: Use tablets, powder, or gel in main dispenser. Amount depends on water hardness and soil level.
Rinse aid: Automatically dispensed during final rinse. Refill when indicator lights.
Salt: Regenerates water softener. Refill when indicator lights (approx. every 2-3 months).
Pre-wash detergent: For heavily soiled loads, add small amount to pre-wash compartment.

WARNING! Do not use regular washing-up liquid. It causes excessive foaming.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean filters: Remove and rinse under running water weekly.
Clean spray arms: Check for blockages and clean monthly.
Wipe door seals: Clean with damp cloth to prevent mold.
Run empty hot cycle: Monthly with dishwasher cleaner to remove grease and limescale.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or scouring pads.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check power outlet; ensure door is closed properly; check child lock.
Poor cleaning results	Loading/detergent	Check loading; use correct detergent amount; clean filters; check spray arms.
Water not draining	Drain hose/filter	Check drain hose for kinks; clean filter; ensure proper installation height.
Leaking water	Hoses/door seal	Check inlet/drain hose connections; inspect door seal for damage.
Unusual noise	Spray arm/items	Check for items touching spray arms; remove foreign objects from pump.
Salt/Rinse aid indicators on	Empty containers	Refill salt and/or rinse aid as needed.

Reset: Unplug for 5 minutes, then restart.

Technical Data

Rated Power Input: 2000 W
Water Pressure: 0.03 - 1.0 MPa
Max Inlet Water Temperature: 60°C
Net Weight: 42 kg
Installation Type: Freestanding
Program Duration (Eco): 195 minutes
Drying System: Condensation drying
Filter System: Triple filtration (micro/meso/macro)

Warranty Information

Beko provides a 2-year manufacturer's warranty for parts and labor from date of purchase. Warranty covers defects in materials and workmanship under normal household use. Not covered: Damage from improper installation, misuse, commercial use, or unauthorized repairs. For warranty service, contact authorized Beko service center with proof of purchase. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).