beko dishwasher DFS26024W manual

The Beko DFS26024W is a 60cm wide built-in dishwasher with 14 place settings, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, half load option, child lock, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 8. Maintenance and Cleaning 9. Error Codes and Troubleshooting 10. Warranty and Support

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, digital display, control panel.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Water Consumption	Approx. 9.5 liters per cycle (Eco program)
Noise Level	49 dB
Programs	Auto, Intensive, Eco, Quick, Delicate, Glass
Delay Start	1-24 hours
Half Load	Option for fewer dishes
Child Lock	Prevents accidental program changes
Display	Digital with remaining time indicator
Dimensions (HxWxD)	82x60x55 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Secure in cabinet: Adjust leveling feet; secure door to adjacent units if required.

WARNING! Dishwasher must be grounded. Do not kink hoses. Ensure all connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without dishes.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, fill with water.
Fill rinse aid dispenser: Open lid, fill to MAX line, close firmly.
Add detergent: Place powder or tablet in main wash compartment.
Select Intensive program at highest temperature; run empty cycle.

CAUTION! Use only dishwasher salt, rinse aid, and detergents. Do not use regular table salt.

Specifications

Model: DFS26024W
Type: Built-in dishwasher
Place Settings: 14
Energy Class: A++
Water Consumption: 9.5-12 liters per cycle
Power Consumption: 0.78 kWh per cycle (Eco)
Programs: 6 main programs + options
Delay Timer: 1-24 hours
Child Lock: Yes
Dimensions: 82 x 60 x 55 cm (HxWxD)
Weight: 38 kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Auto (45-65°C), Intensive (70°C), Eco (50°C), Quick (58°C), Delicate (40°C), Glass (40°C).

Options: Delay Start (1-24h), Half Load (reduces water use), Child Lock (hold 3 sec to activate). Display shows remaining time, program stage, and error codes.

Loading the Dishwasher

Upper basket: Cups, glasses, small plates. Lower basket: Plates, pots, pans. Cutlery basket: Knives, forks, spoons.

Scrape off large food residues; no need to pre-rinse.
Load dishes facing inward; ensure water spray can reach all surfaces.
Place delicate items in upper basket; secure plastic items.
Do not overload; leave space between items.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Detergents and Additives

Use only dishwasher-specific products.

Detergent: Powder, tablets, or gel in main wash compartment.
Rinse Aid: Fill dispenser; adjust dosage (1-6) via dial inside lid.
Salt: Fill salt container when indicator light comes on.
Combined tablets: Contain detergent, rinse aid, and salt substitute; adjust rinse aid dispenser to minimum.

WARNING! Do not use hand washing detergent; it causes excessive suds. Keep detergents out of reach of children.

Maintenance and Cleaning

Monthly maintenance ensures optimal performance.

Clean filters: Remove lower basket, twist and lift out filter assembly, rinse under tap.
Clean spray arms: Check for blockages; rinse holes.
Wipe door seals and interior with damp cloth.
Run empty hot wash with dishwasher cleaner monthly.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or sharp objects.

Error Codes and Troubleshooting

Symptom/Code	Possible Cause	Corrective Action
E1 / No water	Water inlet issue	Check tap is on; inlet hose not kinked; filter clean.
E2 / Drain problem	Drain hose blocked	Check hose for kinks; clean filter; ensure drain height correct.
E3 / Heating fault	Heater issue	Reset by turning power off/on; if persists, call service.
Water leakage	Loose connections	Tighten hoses; check door seal; ensure dishwasher level.
Poor cleaning	Loading/detergent	Check spray arms rotate freely; use correct detergent dose; ensure salt/rinse aid filled.

Reset: Turn power off for 5 minutes, then restart.

Service: 0800 097 0000 (UK); www.beko.co.uk/support

Warranty and Support

2-year manufacturer's warranty. Register product online for extended warranty options. For technical support, contact Beko customer service or visit website. Keep purchase receipt for warranty claims.