Beko Dishwasher DIN 14210 Manual

The Beko Dishwasher DIN 14210 is a freestanding dishwasher designed for household use, featuring energy-efficient washing cycles, multiple program options, adjustable racks, delay start, child lock, and salt/rinse aid indicators. It complies with DIN 14210 standards for performance and safety. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Program Selection 8. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, detergent dispenser, salt container, rinse aid dispenser.

Feature	Description
Programs	Auto, Intensive, Eco, Quick, Glass, Hygiene
Delay Start	Programmable delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Saves water and energy for smaller loads
Water Softener	Adjustable salt container for hard water areas
Rinse Aid Indicator	LED alerts when rinse aid is low
Digital Display	Shows remaining time, program, and status
Adjustable Upper Basket	Height adjustable for larger items
Extra Dry Function	Extended drying for better results
Acoustic Signals	Audible alerts for cycle completion

Installation

Unpack and inspect contents. Ensure location near water supply, drain, and power outlet.

Position dishwasher: Place on level floor near water/drain connections.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet for stability.

WARNING! Ensure water and electrical connections are secure to prevent leaks or electrical hazards. Do not kink hoses.

First-Time Setup

Before first use, prepare dishwasher and set basic parameters.

Remove transport materials: Take out all packaging inside baskets.
Fill salt container: Add dishwasher salt (first use requires 1.5L water in container).
Fill rinse aid dispenser: Fill to MAX line with rinse aid.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Class: A+++ (according to EU regulations)
Water Consumption: 9.5L per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 48 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.03 - 1 MPa
Voltage: 220-240V, 50Hz
Programs: 6 main programs + 4 options

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, EXTRA DRY, CHILD LOCK, START/PAUSE.

Program Selection: Auto (sensors adjust), Intensive (heavily soiled), Eco (energy saving), Quick (58 min), Glass (gentle), Hygiene (70°C).

Options: Delay Start (1-24h), Half Load (reduced consumption), Extra Dry (extended drying), Child Lock (hold 3 sec to activate).

Display Indicators: Program duration, remaining time, salt warning, rinse aid warning, child lock active.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Plates, pots, pans (face inward).
Upper basket: Glasses, cups, bowls (angled downward).
Cutlery basket: Knives, forks, spoons (handles down, mixed types).
Adjust upper basket: Lift to accommodate tall items.
Ensure spray arms rotate freely; no items blocking them.

Tip: Place delicate items in upper basket, heavily soiled items facing spray arms.

Program Selection

Select program based on soil level and dish type.

Program	Temp	Duration	Best For
Auto	45-65°C	105-155 min	Mixed daily loads
Intensive	70°C	175 min	Pots, pans, baked-on
Eco	50°C	200 min	Normally soiled, energy saving
Quick	45°C	58 min	Lightly soiled, fast wash
Glass	40°C	85 min	Crystal, delicate glassware
Hygiene	70°C	145 min	Baby items, sanitizing

WARNING! Plastic items on lower rack may warp. Use upper rack for plastics.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Clean filter weekly: Remove and rinse under water.
Check spray arms monthly: Ensure holes are not clogged.
Wipe door seals: Clean with damp cloth to prevent leaks.
Descale quarterly: Use dishwasher cleaner or vinegar cycle.
Refill salt: When salt indicator lights (approx. every 20 cycles).
Refill rinse aid: When rinse aid indicator lights.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Regulatory Information

Complies with DIN 14210, EN 50242, and EU Ecodesign Directive. Energy label according to EU 2019/2022. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact +44 (0) 333 207 9710.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Door not closed/power	Ensure door latched; check power outlet; circuit breaker.
Poor cleaning results	Loading/spray arms	Rearrange load; clean filter and spray arms; use correct detergent.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks; ensure proper height.
Leaking water	Door seal/inlet hose	Check door seal for debris; tighten inlet hose connections.
Noise during operation	Foreign objects	Check for items touching spray arms; remove debris from pump.
Salt indicator remains on	Salt container empty	Refill salt; run short program to dissolve salt.

Reset: Unplug for 5 minutes, then restart.

Service: +44 (0) 333 207 9710; www.beko.com