Beko Dishwasher DIN 1531 Manual

The Beko DIN 1531 is a built-in dishwasher designed for efficient cleaning with multiple wash programs, energy-saving features, and user-friendly controls. It features a stainless steel interior, adjustable upper basket, salt and rinse aid indicators, child lock, delay start, and aquastop protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Error Codes 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Spray arms, Filter system, Detergent dispenser, Salt container, Rinse aid dispenser, Upper and lower baskets, Cutlery basket.

Feature	Description
Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Capacity	Up to 13 place settings
Energy Rating	A++ (Energy efficient)
Delay Start	1-24 hours delay timer
Child Lock	Prevents accidental program changes
Aquastop	Full protection against water leaks
Half Load	Option for smaller loads to save water/energy
Display	LED indicators for program, time, and status
Drying	Condensation drying with fan option
Noise Level	49 dB (Quiet operation)

Installation

Unpack and inspect contents. Ensure installation space meets requirements.

Position dishwasher: Place in prepared cabinet space under countertop.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (min 40 cm, max 100 cm from floor).
Electrical connection: Plug into grounded 220-240V, 50Hz socket.
Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks or hazards.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport safety locks: Check interior for packing materials.
Fill salt container: Use only dishwasher salt; set hardness level according to water hardness.
Fill rinse aid dispenser: Adjust dosage (1-6) based on water hardness.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Set language and preferences: Use PROGRAM button and settings menu if available.

CAUTION! Use only recommended detergents and additives. Do not use regular table salt.

Specifications

Model: DIN 1531
Type: Built-in dishwasher
Dimensions (HxWxD): 82 x 60 x 55 cm
Water Pressure: 0.03 - 1 MPa
Power Consumption: 0.78 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Programs: 6 main programs + 4 options
Drying System: Condensation
Warranty: 2 years standard, extendable

Controls and Settings

Control Panel: POWER, PROGRAM selector, START/PAUSE, DELAY START, HALF LOAD, CHILD LOCK.

Programs: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse (cold).

Settings: Press and hold PROGRAM for 3 seconds to access settings menu - Water hardness (H1-H6), Rinse aid level (1-6), Buzzer on/off, Reset filter indicator.

Indicator Lights: Salt (red - refill), Rinse aid (green - refill), End (green - cycle complete), Clean filter (red - clean filter).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Lower basket: Pots, pans, plates, bowls (facing center).
Upper basket: Glasses, cups, small bowls, plastic items.
Cutlery basket: Knives, forks, spoons (handles down), separate silver from stainless steel.
Adjust upper basket height: Lift levers on both sides to raise/lower.
Ensure spray arms rotate freely: No items blocking movement.

Tip: Do not overload. Place delicate items in upper basket only.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main dispenser (15-25g depending on soil level). Use tablets or powder.
Rinse aid: Fill dispenser in door; adjust dosage level (1-light, 6-heavy).
Salt: Fill container in bottom of tub (only when salt indicator lights).
Combination tablets: Can replace detergent and rinse aid (adjust settings accordingly).

WARNING! Never use regular washing-up liquid. Keep detergents out of children's reach.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter weekly: Remove and rinse under running water.
Clean spray arms monthly: Check for clogged holes.
Descale every 3 months: Use dishwasher cleaner or vinegar cycle.
Wipe door seals: Keep clean to maintain water tightness.
Clean exterior: Use damp cloth with mild detergent.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Error Codes

Code	Meaning	Action
E1	Water inlet problem	Check water supply, tap, hose
E2	Drainage problem	Check drain hose, filter, pump
E3	Heating problem	Check heating element, sensor
E4	Door open	Close door properly
E5	Water leak detected	Check aquastop, turn off water

Reset: Unplug for 5 minutes, then restart.

Regulatory Information

CE marked. Complies with EU directives for safety (LVD) and electromagnetic compatibility (EMC). Energy label: A++ according to EU regulation 1059/2010. WEEE symbol: Do not dispose with household waste. For disposal, contact local authorities. Manufacturer: Beko PLC, UK. For support, visit www.beko.com or contact 0333 207 9710.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishes not clean	Spray arms blocked, wrong program, old detergent	Clean spray arms/filter, choose Intensive program, use fresh detergent
Water not draining	Filter clogged, drain hose kinked	Clean filter, check hose position
Noise during operation	Items touching spray arms, pump issue	Rearrange load, check for foreign objects
Door won't close	Obstruction, misaligned basket	Check for items blocking door, adjust basket
Salt light remains on	Salt container empty, setting incorrect	Refill salt, check hardness setting

Service: 0333 207 9710; www.beko.com/uk/support