Beko Dishwasher DIN 15X10 Manual

The Beko DIN 15X10 is a built-in dishwasher designed for standard kitchen cabinets, featuring a 15-place setting capacity, 10 washing programs, energy efficiency class A, half-load option, delay start timer, child lock, salt and rinse aid indicators, and aquastop protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

Installation

Unpack and inspect contents. Ensure proper electrical and water connections.

1. Position dishwasher: Place in standard 60cm wide cabinet opening.
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
4. Electrical connection: Connect to 220-240V, 50Hz grounded socket.
5. Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by a qualified technician. Ensure water and electrical connections are secure to prevent leaks and hazards.

First-Time Setup

Before first use, prepare the dishwasher.

1. Remove transport materials: Take out all interior packaging and securing brackets.
2. Fill salt container: Add dishwasher salt to the softener unit (only for hard water areas).
3. Fill rinse aid: Pour rinse aid into the designated dispenser.
4. Run initial cycle: Select an intensive program without dishes to clean interior.
5. Set water hardness: Use the program buttons to set according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt or other substitutes.

Specifications

• Type: Built-in dishwasher.
• Place Settings: 15 standard sets.
• Programs: 10 (Intensive, Eco, Auto, Quick 30', Glass, Delicate, etc.).
• Energy Consumption: ~1.05 kWh per cycle (Eco program).
• Water Consumption: ~12 liters per cycle (Eco program).
• Noise Level: 49 dB(A).
• Dimensions (HxWxD): 82 x 59.8 x 55 cm.
• Power Supply: 220-240V, 50Hz.
• Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Access programs and settings via the front control panel.

Control Panel: POWER ON/OFF, PROGRAM SELECTION knob/digital buttons, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (70°C), Eco (50°C), Auto (45-65°C), Quick 30' (40°C), Glass (40°C), Delicate (40°C), Pre-Rinse. Settings: Water hardness (H1-H5), Rinse aid dosage (1-5), Acoustic signal on/off. Indicators: Salt, Rinse aid, End of cycle, Door open.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

1. Scrape off large food residues.
2. Load lower basket: Plates, pots, pans. Ensure items do not block spray arms.
3. Load upper basket: Glasses, cups, small bowls. Use fold-down cup shelves.
4. Cutlery basket: Place knives, forks, spoons with handles down for safety.
5. Adjust upper basket height if needed for taller items.

Tip: Do not overload. Place delicate items in the upper basket. Ensure spray arms can rotate freely.

Using Detergents & Additives

Use only products designed for dishwashers.

1. Detergent: Fill the main detergent dispenser (powder, tablets, or gel). Use amount according to water hardness and soil level.
2. Rinse Aid: Fill the rinse aid dispenser. Adjust dosage level (1-5) for spot-free drying.
3. Salt: Fill the salt container only if you have hard water (prevents limescale).

WARNING! Do not mix different detergent types. Keep all additives out of reach of children.

Program Selection

Select program based on load type and soil level.

1. Turn on: Press POWER.
2. Select program: Use PROGRAM button or knob.
3. Optional settings: Press HALF LOAD for fewer dishes; DELAY START to set timer.
4. Close door and press START/PAUSE. The cycle begins.
5. At end of cycle: Acoustic signal sounds (if enabled). Open door slightly to aid drying.

Program Guide: Intensive for heavily soiled pots; Eco for normal daily loads; Quick 30' for lightly soiled; Glass for delicate items.

Care & Maintenance

Regular maintenance ensures longevity and performance.

1. Clean filters: Remove lower basket, twist out filter assembly, rinse under tap weekly.
2. Clean spray arms: Check for blockages and rinse.
3. Wipe door seals: Use damp cloth to remove debris.
4. Descale: Run empty cycle with dishwasher cleaner every 2 months if in hard water area.
5. Exterior: Clean with soft, damp cloth. Do not use abrasive cleaners.

CAUTION! Unplug appliance before any maintenance. Never remove filters while dishwasher is operating.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Reset: Turn off power for 2 minutes, then restart.

Service: Consult user manual first. For persistent issues, contact authorized Beko service: www.beko.com.