Beko Dishwasher DIN 26420 Manual

The Beko DIN 26420 is a built-in dishwasher featuring energy-efficient operation, multiple wash programs, adjustable racks, delay start, child lock, and salt/rinse aid indicators. It complies with DIN 26420 standards for integration into standard kitchen cabinetry. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser, and water inlet/outlet connections.

Feature	Description
Energy Class	A++ for energy efficiency
Wash Programs	8 programs including Eco, Intensive, Quick, Glass
Delay Start	1-24 hour timer
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when regenerating salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Half Load Option	Saves water and energy for partial loads
Adjustable Upper Basket	Height adjustable for taller items
Acoustic Signal	Beeps when cycle ends
AquaStop	Protection against water leaks

Installation

Unpack and inspect contents. Ensure installation space meets DIN 26420 dimensions.

Position dishwasher: Place in prepared cabinet opening (60cm width standard).
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper drainage into sink or waste pipe.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging inside the tub.
Fill salt container: Add special dishwasher salt up to the rim (first use only).
Fill rinse aid: Pour into dispenser until MAX indicator.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust setting according to local water hardness using program buttons.

CAUTION! Use only dishwasher salt and rinse aid specified in manual.

Specifications

Type: Built-in, fully integrated (DIN 26420).
Capacity: 13 place settings.
Energy Consumption: 0.95 kWh per cycle (Eco program).
Water Consumption: 10 liters per cycle (Eco program).
Noise Level: 49 dB(A).
Programs: 8 programs + 4 temperature options.
Dimensions (HxWxD): 82 x 60 x 55 cm (installation dimensions).
Power Supply: 220-240V, 50Hz.
Max Inlet Pressure: 1 MPa (10 bar).
Weight: 42 kg.

Controls and Settings

Control Panel: ON/OFF button, program selector, delay start, half load, child lock, and display indicators.

Program Selection: Eco (50°C), Intensive (70°C), Quick (45°C), Glass (40°C), Auto, Hygiene, Rinse, Pre-wash.

Display Indicators: Salt warning, rinse aid warning, program progress, delay time, child lock active.

Settings Menu: Press and hold Eco button for 3 seconds to access: water hardness (H1-H5), acoustic signal on/off, rinse aid dosage (1-5).

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

Scrape off large food residues before loading.
Lower basket: Plates, pots, pans (face inward).
Upper basket: Cups, glasses, small bowls (angled downward).
Cutlery basket: Knives, forks, spoons (handles down for safety).
Adjust upper basket: Lift to accommodate tall items in lower basket.
Ensure spray arms rotate freely without obstruction.

Tip: Do not overload; leave space between items for water circulation.

Wash Programs

Select program based on soil level and dish type.

Program	Temperature	Duration	Best For
Eco	50°C	3:15 h	Normally soiled dishes, energy saving
Intensive	70°C	2:45 h	Heavily soiled pots, pans
Quick	45°C	0:35 h	Lightly soiled, quick wash
Glass	40°C	1:45 h	Glassware, delicate items
Auto	45-65°C	2:00 h	Automatic soil detection
Hygiene	70°C	3:30 h	Baby bottles, sanitizing
Rinse	Cold	0:15 h	Rinse only, no detergent
Pre-wash	Cold	0:20 h	Pre-rinse before main wash

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filter: Remove and rinse under water weekly.
Clean spray arms: Check for clogged holes monthly.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months.
Door seals: Wipe clean with damp cloth.
Exterior: Clean with mild detergent and soft cloth.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Press and hold Half Load and Quick buttons for 3 seconds to activate/deactivate. AquaStop: Automatic water shutoff if leak detected. Door Safety: Door locks during operation; opens automatically when cycle ends and temperature is safe. Overheat Protection: Thermal cut-out prevents overheating.

Regulatory Information

CE Marking: Complies with European Low Voltage and EMC directives. Energy Label: A++ rating according to EU regulations. Waste Electrical: Dispose according to WEEE directive. Manufacturer: Beko PLC, UK. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check plug; ensure door closed properly; check circuit breaker.
Poor cleaning results	Loading/detergent	Improve loading; use fresh detergent; clean filter; check water temperature.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height correct (max 1m).
Salt indicator blinking	Salt low	Refill salt container; run short program to flush system.
Noise during operation	Spray arm/items	Check for items touching spray arm; ensure proper loading.
Leaking water	Door seal/hose	Check door seal for debris; tighten hose connections; ensure proper levelling.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710 (UK); www.beko.com