Beko Dishwasher DIN 28422 Manual

The Beko DIN 28422 is a freestanding dishwasher designed for efficient cleaning with multiple wash programs, energy-saving features, and user-friendly controls. It features a stainless steel interior, adjustable upper basket, salt and rinse aid indicators, child lock, delay start, and aquastop protection. Below are key sections covering safety, features, installation, daily use, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

Feature	Description
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	Program start delay from 1 to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Salt Indicator	LED alerts when water softener salt is low
Rinse Aid Indicator	LED alerts when rinse aid needs refilling
Aquastop	Protection against water leakage
Half Load Option	Reduces water and energy for smaller loads
Adjustable Upper Basket	Height adjustment for taller items
Digital Display	Shows remaining time, program, and status
Energy Rating	A++ for energy efficiency

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or standpipe (min height 40 cm).
Level the appliance: Adjust feet until dishwasher is stable and level.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Do not use extension cord. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, remove shipping materials and prepare dishwasher.

Fill salt container: Add special dishwasher salt up to rim, then run a rinse program.
Fill rinse aid: Open dispenser, fill to MAX line, close securely.
Select language: Press and hold START for 3 seconds to choose display language.
Run initial cycle: Run an empty wash on Intensive program to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding dishwasher.
Capacity: 12 place settings.
Water Consumption: Approx. 9-12 liters per cycle (Eco program).
Energy Consumption: 0.78 kWh per cycle (Eco program).
Noise Level: 49 dB(A).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Water Pressure: 0.03 - 1 MPa.
Programs: Auto, Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Rinse.
Warranty: 2 years standard, extendable via registration.

Controls and Settings

Control Panel: POWER, PROGRAM selector, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Program Selection: Turn knob to select: Auto (senses soil), Intensive (tough stains), Eco (daily wash), Quick (light soil), Glass (fragile), Rinse (no detergent).

Settings: Delay Start (1-24h), Half Load (reduces consumption), Child Lock (press 3 sec). Display shows time remaining, salt/rinse aid alerts, error codes. Reset: Hold POWER for 5 seconds.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans. Face soiled surfaces inward.
Upper basket: Glasses, cups, bowls. Adjust height if needed.
Cutlery basket: Place knives pointing down, mixed types for separation.
Ensure spray arms rotate freely; do not block with large items.

Tip: Refer to loading diagram on inner door for guidance.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main dispenser with powder, tablet, or gel. Close lid firmly.
Rinse Aid: Adjust dispenser setting (1-6) based on water hardness; higher for hard water.
Salt: Refill when indicator lights. Use funnel to avoid spillage in softener unit.
Pre-wash: For heavily soiled loads, add small amount of detergent to pre-wash chamber.

WARNING! Do not mix different detergent types. Store in cool, dry place.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Clean filter: Remove lower basket, twist filter assembly, rinse under tap weekly.
Clean spray arms: Remove and check for blockages; rinse monthly.
Wipe door seals: Use damp cloth to remove debris.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months if in hard water area.
Exterior: Wipe with soft, damp cloth; no abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use steam cleaners.

Safety Features

Child Lock: Press and hold for 3 seconds to lock controls. Aquastop: Automatic water shut-off if leak detected. Door Safety: Dishwasher stops if door opened during cycle. Overheat Protection: Thermostat prevents overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label: A++ rating. Waste disposal: Follow local regulations; contact municipality for recycling. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check plug; ensure door closed; disable child lock.
Poor cleaning results	Loading, detergent, filter	Improve loading; use fresh detergent; clean filter.
Water not draining	Drain hose, filter blockage	Check hose for kinks; clean filter; ensure standpipe height.
Leaking water	Hose connections, door seal	Tighten connections; check seal for damage; ensure level.
Unusual noise	Spray arm, foreign objects	Check for obstructions; ensure spray arms rotate freely.
Salt indicator on	Salt empty, setting incorrect	Refill salt; check water hardness setting.
Error code E1	Water inlet issue	Check tap is on; inlet hose not kinked; filter clean.

Reset: Unplug for 1 minute, then restart.

Service: 0333 207 9710; www.beko.com