Beko Dishwasher DIN 4530 Manual

The Beko DIN 4530 is a freestanding dishwasher featuring energy-efficient A+++ rating, 14-place settings, 7 wash programs including Eco, Intensive, and Quick Wash, digital display, delay timer, child lock, half-load option, and adjustable upper basket. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filter system, and inlet/outlet hoses.

FeatureDescription
Digital DisplayShows program status, time remaining, and error codes
Wash Programs7 programs including Eco, Intensive, Quick, Glass, etc.
Delay TimerDelays start up to 24 hours
Child LockLocks control panel to prevent accidental changes
Half Load OptionReduces water and energy for smaller loads
Adjustable Upper BasketHeight can be adjusted for taller items
Salt ContainerFor water softening to prevent limescale
Rinse Aid DispenserImproves drying and reduces spots
Detergent DispenserHolds powder or tablet detergent
Filter SystemIncludes coarse and fine filters for food particles

Installation

Unpack and inspect contents. Ensure location near water supply, drain, and power outlet.

  1. Connect water inlet: Attach inlet hose to cold water tap using supplied connector.
  2. Connect drain hose: Place hose into sink or connect to waste pipe (max height 1m).
  3. Level the dishwasher: Adjust feet to ensure unit is stable and level.
  4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

  1. Fill salt container: Remove lower basket, unscrew salt cap, fill with water first time, then add salt until full.
  2. Fill rinse aid: Open dispenser on door, fill to MAX line, close cap.
  3. Run empty wash: Select Intensive program without dishes to clean interior.
  4. Set water hardness: Use program button combination to set according to local water hardness.

CAUTION! Use only dishwasher salt, not table salt. Ensure salt cap is tightly closed.

Specifications

Controls and Settings

Access controls via digital panel on top of door. Buttons: POWER, PROGRAM, DELAY START, CHILD LOCK, HALF LOAD, START/PAUSE.

Program Selection: Press PROGRAM to cycle through options (Eco, Intensive, Quick, etc.). Display shows duration and icons.

Settings: Delay Start (1-24 hours), Child Lock (hold for 3 seconds), Half Load (reduces consumption). Indicators: Salt low, Rinse Aid low, End of cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: For plates, pots, pans. Adjustable tines for different sizes.
  3. Upper basket: For glasses, cups, bowls. Height adjustable.
  4. Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
  5. Detergent: Add powder or tablet to dispenser. Use rinse aid for better drying.

Tip: Do not overload; ensure spray arms can rotate freely. Place delicate items in upper basket.

Using Wash Programs

Select program based on load type and soil level.

  1. Eco: For normally soiled dishes, energy-efficient (approx. 3 hours).
  2. Intensive: For heavily soiled pots and pans (approx. 2 hours).
  3. Quick 30': Lightly soiled, quick wash (30 minutes).
  4. Glass: For delicate glassware at lower temperature.
  5. 90': Standard daily wash.
  6. Auto: Adjusts time/temp based on soil sensors.
  7. Rinse: Rinse only, no detergent needed.

To start: Close door, select program, press START/PAUSE. To pause, press START/PAUSE again.

Care & Maintenance

Regular maintenance ensures performance and longevity.

  1. Clean filters: Remove lower basket, twist and lift out filter assembly, rinse under water weekly.
  2. Check spray arms: Ensure holes are not clogged; rotate manually.
  3. Wipe door seals: Use damp cloth to remove debris.
  4. Descale: Run empty with vinegar or descaler monthly if in hard water area.
  5. Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not run without filters.

Safety Features

Child Lock: Locks controls to prevent changes. Door Safety: Door locks during operation; opens automatically if opened mid-cycle (water may be hot). Overflow Protection: Auto shut-off if leak detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Manufactured by Beko PLC. For support, visit www.beko.com or contact local service center. Model DIN 4530.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower, door, child lockCheck plug; ensure door closed properly; disable child lock.
Poor cleaning resultsLoading, detergent, filtersReload dishes properly; use correct detergent; clean filters.
Water not drainingDrain hose, filter blockageCheck hose for kinks; clean filter; ensure drain height ≤1m.
Leaking waterHose connections, door sealTighten inlet/drain hoses; check door seal for debris/damage.
Noise during operationSpray arm, foreign objectsEnsure spray arms rotate freely; check for small objects in pump.
Salt/Rinse Aid indicators onLow levelsRefill salt and/or rinse aid containers.

Reset: Unplug for 5 minutes, then restart. For error codes (e.g., E1, E2), consult manual.

Service: Contact authorized Beko service; www.beko.com.

Beko Dishwasher DIN 4530 Manual © - All Rights Reserved 2025