Beko Dishwasher DIN 5631 Manual

The Beko DIN 5631 is a built-in dishwasher featuring energy-efficient A+++ rating, 14 place settings capacity, multiple wash programs (Auto, Intensive, Eco, Quick, Glass, Delicate), half-load option, adjustable upper basket, salt and rinse aid indicators, child lock, delay start, and acoustic signal. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, water inlet and drain hoses.

Feature	Description
Energy Rating	A+++ for high energy efficiency
Capacity	14 standard place settings
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Delicate
Half Load Option	Reduces water and energy for smaller loads
Adjustable Upper Basket	Height adjustable for taller items
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Child Lock	Prevents accidental program changes
Delay Start	Program start delay up to 24 hours
Acoustic Signal	Audible signal when cycle ends
Display	Digital display showing time and status

Installation

Unpack and inspect contents. Ensure installation space meets dimensions.

Position dishwasher: Place in prepared cabinet space under countertop.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Route to sink drain or standpipe (min height 40 cm).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet to ensure stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks and hazards.

First-Time Setup

Before first use, prepare dishwasher.

Remove transport materials: Take out all packaging and securing brackets.
Fill salt container: Add special dishwasher salt (approx. 1 kg) and fill with water.
Fill rinse aid dispenser: Pour rinse aid up to MAX mark.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust setting in settings menu based on local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt or other substitutes.

Specifications

Model: DIN 5631
Type: Built-in dishwasher
Energy Class: A+++
Water Consumption: Approx. 9.5 liters per cycle (Eco program)
Power Consumption: Approx. 0.78 kWh per cycle (Eco program)
Rated Power: 2100 W
Voltage/Frequency: 220-240V ~ 50Hz
Water Pressure: 0.03 - 1 MPa
Noise Level: 49 dB(A)
Dimensions (HxWxD): 815 x 598 x 550 mm

Controls and Settings

Control Panel: POWER, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Programs: Auto (senses soil level), Intensive (for heavily soiled), Eco (energy saving), Quick (58 min), Glass (gentle), Delicate (for fine china).

Settings Menu: Access by holding Settings button for 3 seconds. Options: Water hardness (H1-H5), acoustic signal on/off, rinse aid dosage (1-5), reset to factory defaults.

Indicator Lights: Salt (red), Rinse Aid (green), Door Lock (blue), Program Progress (LEDs).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans. Place facing center.
Upper basket: For glasses, cups, small plates. Adjust height if needed.
Cutlery basket: Place knives, forks, spoons with handles down.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main detergent dispenser (15-25 g for normal soil). Use tablets if compatible.
Rinse Aid: Fill dispenser; adjust dosage in settings for spot-free drying.
Salt: Only for models with water softener. Refill when salt indicator lights.
Pre-wash: For heavily soiled loads, add small amount to pre-wash compartment.

WARNING! Do not mix different detergent types. Keep all products out of reach of children.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove and rinse under water weekly.
Clean spray arms: Check for blockages monthly.
Wipe door seals: Use damp cloth to remove residue.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months.
Long storage: Turn off water and power; leave door slightly open.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all safety instructions before use.

Connect to grounded outlet only.
Do not open door during hot wash cycles.
Keep children away from open dishwasher and detergents.
Do not wash items soiled with flammable substances.
Disconnect power before any maintenance.

In case of emergency, turn off water supply and disconnect power.

Regulatory Information

CE marked. Complies with EU directives for low voltage, electromagnetic compatibility, and eco-design. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door lock	Check power connection; ensure door is closed properly.
Poor cleaning results	Loading, filters, detergent	Check loading; clean filters; use correct detergent amount.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks; clean filter system.
Salt indicator blinking	Salt container empty	Refill salt container; run short program to regenerate.
Unusual noise	Spray arm, foreign objects	Check for items blocking spray arm; remove foreign objects.
Error code E1	Water inlet problem	Check water supply tap; clean inlet filter.
Error code E2	Drainage problem	Check drain hose height; remove blockage.

Reset: Unplug for 5 minutes, then reconnect.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.