Beko Dishwasher DIN 5833 Manual

The Beko Dishwasher DIN 5833 is a freestanding dishwasher featuring energy-efficient operation, multiple wash programs, adjustable racks, delay start, child lock, and salt/rinse aid indicators. It complies with DIN 5833 standards for hygiene and performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, inlet hose, drain hose, and power cord.

Feature	Description
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Salt Indicator	LED alerts when water softener salt is low
Rinse Aid Indicator	LED alerts when rinse aid needs refilling
Adjustable Upper Basket	Height adjustable for larger items
Half Load Option	Reduces water and energy for partial loads
Acoustic Signal	Beeps when program ends (can be disabled)
Energy Class	A++ for energy efficiency
Noise Level	48 dB (quiet operation)

Installation

Unpack and inspect contents. Ensure location near water inlet, drain, and power outlet.

Position dishwasher: Level using adjustable feet on stable floor.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Remove transport locks: Take out screws from rear and fill holes with caps.

WARNING! Only use dedicated water and electrical connections. Do not kink hoses.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg special dishwasher salt, then run a short program without dishes.
Fill rinse aid: Open dispenser on door, fill to MAX line, close.
Select language: Press and hold START for 3 seconds to cycle languages.
Run initial wash: Add detergent, select Intensive program, run empty to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Never use table salt.

Specifications

Type: Freestanding dishwasher.
Capacity: 13 place settings.
Water Consumption: 10 liters per cycle (Eco program).
Power Consumption: 0.95 kWh per cycle (Eco program).
Water Pressure: 0.04-1 MPa.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Net Weight: 42 kg.
Programs: Auto (60°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse.
Standards: DIN 5833, EN 50242, IEC 60436.

Controls and Settings

Control Panel: ON/OFF button, program selector knob, START/PAUSE, DELAY, HALF LOAD, CHILD LOCK buttons, and display icons.

Display Icons: Salt indicator, Rinse Aid indicator, End of program, Door open, Water supply error.

Program Selection: Turn knob to desired program; display shows duration and temperature. Delay Start: Press DELAY, then use +/- to set hours (1-24). Child Lock: Press and hold CHILD LOCK for 3 seconds; repeat to disable. Half Load: Press HALF LOAD when upper or lower basket only is used.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans (face inward).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Knives, forks, spoons (handles down, mixed types).
Adjust upper basket: Lift levers on sides to raise/lower.
Ensure spray arms rotate freely; do not block with large items.

Tip: Place delicate items in upper basket, heavily soiled items facing center.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Open dispenser, add powder/tablet to main chamber, close.
Select program: Turn knob (see program guide below).
Optional settings: Press DELAY or HALF LOAD if needed.
Start: Press START; door locks and cycle begins.
Pause: Press START/PAUSE to stop; press again to resume.
End: Acoustic signal sounds; display shows End icon.

Program	Temp	Duration	Use For
Auto	45-65°C	105 min	Mixed daily load
Intensive	70°C	150 min	Pots, pans, baked-on soil
Eco	50°C	180 min	Normally soiled, energy saving
Quick	45°C	30 min	Lightly soiled, quick wash
Glass	40°C	75 min	Crystal, delicate glassware
Rinse	Cold	15 min	Rinse only, no detergent

WARNING! Do not open door during hot wash; steam may cause burns.

Maintenance & Care

Regular maintenance ensures longevity and performance.

Clean filters: Remove lower basket, twist out coarse and fine filters, rinse under water weekly.
Clean spray arms: Remove by unscrewing caps, clear any blockages.
Check salt: Refill when indicator lights (approx. every 20 cycles).
Check rinse aid: Refill when indicator lights (adjust dosage via dial inside dispenser).
Exterior: Wipe with damp cloth; never use abrasive cleaners.
Run empty hot wash monthly: Use dishwasher cleaner or vinegar to remove grease.

CAUTION! Unplug before maintenance. Do not run without filters.

Regulatory Information

Complies with DIN 5833 standards for cleaning and drying performance, hygiene, and material safety. EU Energy Label: A++ for energy efficiency, A for drying. Conforms to EU directives 2014/35/EU (LVD), 2014/30/EU (EMC), 2009/125/EC (ErP). For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check plug, fuse; ensure door closed; disable child lock.
Water not entering	Tap, hose, filter	Open tap; check hose for kinks; clean inlet filter.
Water not draining	Drain hose, filter blockage	Check hose position; clean filters and pump area.
Poor cleaning results	Loading, detergent, spray arms	Reload properly; use fresh detergent; clean spray arms.
Salt indicator on	Salt empty	Refill salt container; run short program.
Noise during wash	Foreign object, spray arm	Check for items touching spray arm; remove foreign objects.
Door won't open	Program running, safety lock	Wait until program ends or unlock with manual release (see manual).

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; do not attempt repairs yourself.