Beko Dishwasher DIN15212 Manual

The Beko DIN15212 is a built-in dishwasher with a 12-place setting capacity, featuring multiple wash programs, energy efficiency class A, delay start, child lock, half-load option, and aquastop protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filter system, and inlet/drain hoses.

Installation

Unpack and inspect contents. Ensure proper electrical and water connections.

1. Position dishwasher: Place in prepared cabinet space under countertop.
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Ensure proper height (min 40 cm, max 100 cm from floor).
4. Electrical connection: Connect to 220-240V, 50Hz grounded outlet.
5. Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before first use.

First-Time Setup

Before first use, prepare the dishwasher for operation.

1. Remove transport materials: Take out all packaging and transit bolts.
2. Fill salt container: Add special dishwasher salt to softener unit (first use only).
3. Fill rinse aid: Pour into designated compartment up to MAX mark.
4. Run initial cycle: Select Intensive program without dishes to clean interior.
5. Set water hardness: Adjust according to local water hardness using program buttons.

CAUTION! Use only dishwasher salt in salt container. Do not use table salt.

Specifications

• Model: Beko DIN15212
• Type: Built-in dishwasher
• Capacity: 12 place settings
• Dimensions (HxWxD): 82 x 60 x 55 cm
• Water Consumption: 12 liters per cycle (Eco program)
• Power Consumption: 0.95 kWh per cycle (Eco program)
• Voltage/Frequency: 220-240V, 50Hz
• Max Inlet Pressure: 1 MPa (10 bar)
• Programs: 6 wash programs + 3 temperature options
• Drying System: Condensation drying

Controls and Settings

Control panel includes: Power button, Program selector, Delay start, Half load, Child lock, Start/Pause.

Program Selection: Turn knob to select: Intensive (70°C), Eco (50°C), Normal (65°C), Quick (45°C), Glass (40°C), Rinse only.

Additional Functions: Delay Start (1-24h), Half Load (for upper basket only), Child Lock (press 3 sec to activate).

Indicator Lights: Salt warning, Rinse aid warning, End of program.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

1. Scrape off large food residues before loading.
2. Upper basket: For glasses, cups, saucers, small plates.
3. Lower basket: For plates, pots, pans, bowls.
4. Cutlery basket: Place knives, forks, spoons with handles down.
5. Ensure items don't block spray arms or detergent dispenser.
6. Load delicate items securely to prevent movement.

Tip: Refer to loading diagram on inner door for optimal arrangement.

Using Wash Programs

Select appropriate program based on soil level and dish type.

1. Intensive (70°C): Heavily soiled pots, pans, oven dishes.
2. Eco (50°C): Normally soiled dishes, energy efficient.
3. Normal (65°C): Daily use for mixed load.
4. Quick (45°C): Lightly soiled dishes, 30-minute cycle.
5. Glass (40°C): Delicate glassware, crystal.
6. Rinse only: For holding dishes until full load.

Using Detergents: Use only dishwasher detergents. Fill main wash and pre-wash compartments as indicated.

WARNING! Do not use regular soap or washing-up liquid.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Clean filter assembly weekly: Remove, rinse under tap, replace.
2. Check spray arms monthly: Ensure holes are not clogged.
3. Wipe door seals: Clean with damp cloth to prevent leaks.
4. Descale periodically: Use dishwasher cleaner every 2-3 months.
5. Check salt level: Refill when salt indicator light comes on.
6. Check rinse aid: Refill when rinse aid indicator light comes on.

CAUTION! Unplug appliance before any maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Prevents children from changing settings or opening door during cycle.

Aquastop: Full protection against water leaks from inlet hose.

Overflow Protection: Automatic shut-off if water level becomes too high.

Thermal Protection: Prevents overheating of motor and heating element.

Door Safety: Door locks automatically during wash cycle.

Regulatory Information

CE Marked: Complies with European safety standards. Energy Label: Class A according to EU regulations. WEEE Directive: Contains recyclable materials; dispose of properly. For support, visit www.beko.com or contact local Beko service center. Serial number located on rating plate inside door frame.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.