Beko Dishwasher DIN15310 Manual

The Beko Dishwasher DIN15310 is a freestanding dishwasher designed for home use, featuring multiple wash programs, energy efficiency, and user-friendly controls. It complies with DIN 15310 standards for performance and safety. Below are key sections covering safety instructions, features, installation, daily use, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Spray arms, Filter system, Detergent dispenser, Rinse aid dispenser, Door latch, Adjustable upper basket, Cutlery basket.

FeatureDescription
Control PanelDigital display with program selection buttons
Spray ArmsUpper and lower rotating arms for thorough cleaning
Filter SystemMulti-stage filtration (coarse and fine filters)
Detergent DispenserCompartments for main wash and pre-wash
Rinse Aid DispenserAdjustable dosage for spot-free drying
Door LatchSafety lock during operation
Adjustable Upper BasketHeight adjustable for taller items
Cutlery BasketRemovable basket for utensils
Delay StartProgrammable start time (1-24 hours)
Child LockPrevents accidental program changes

Installation

Unpack and inspect contents. Ensure location near water supply, drain, and power outlet.

  1. Position dishwasher: Place on level floor near sink.
  2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  3. Connect drain hose: Secure to sink drain or standpipe (height 40-100 cm).
  4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  5. Level the appliance: Adjust feet to ensure stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks or shock hazards.

First-Time Setup

Before first use, remove all packaging materials and prepare the dishwasher.

  1. Salt filling: Fill the water softener with special dishwasher salt (if model has built-in softener).
  2. Rinse aid: Fill rinse aid dispenser to MAX line.
  3. Detergent: Use only recommended dishwasher detergents.
  4. Test run: Run a short wash cycle without dishes to clean interior.
  5. Program selection: Familiarize yourself with control panel buttons and display.

CAUTION! Do not use regular table salt. Overfilling salt or rinse aid may cause malfunction.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, CHILD LOCK, RINSE AID INDICATOR, SALT INDICATOR.

Program Buttons: ECO, INTENSIVE, NORMAL, RAPID, GLASS, PRE-RINSE.

Settings: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Use PROGRAM SELECTION to choose wash program. DELAY START to set timer. Indicators show when salt or rinse aid needs refilling.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying results.

  1. Scrape off large food residues before loading.
  2. Place plates, bowls in lower basket facing center.
  3. Adjust upper basket height for taller glasses/pans.
  4. Load cups, glasses upside down in upper basket.
  5. Place cutlery in basket with handles down (sharp items pointing down).
  6. Ensure spray arms can rotate freely (no obstruction).

Tip: Do not overload. Place delicate items in top basket away from heating element.

Wash Programs

Select program based on soil level and dish type.

ProgramTemperatureDurationUse For
ECO50°C3h 15minNormally soiled dishes, energy saving
INTENSIVE70°C2h 45minHeavily soiled pots, pans
NORMAL65°C2h 30minDaily wash, mixed load
RAPID45°C1hLightly soiled, quick wash
GLASS40°C1h 20minDelicate glassware, crystal
PRE-RINSECold15minRinse before main wash

Note: Program durations are approximate and may vary.

Care & Maintenance

Regular maintenance ensures longevity and performance.

  1. Clean filters weekly: Remove, rinse under tap, reinsert.
  2. Check spray arms monthly: Ensure holes are not clogged.
  3. Wipe door seals: Clean with damp cloth to prevent leaks.
  4. Descale periodically: Use dishwasher cleaner every 2-3 months.
  5. Clean interior: Run empty cycle with vinegar or cleaner monthly.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners or sharp objects on interior.

Safety Information

Read all instructions before use. Keep manual for reference.

WARNING! Risk of electric shock if used improperly. Do not attempt repairs yourself.

Regulatory Information

This appliance complies with DIN 15310 standards, EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2012/19/EU (WEEE). CE marked. Manufactured by Beko PLC. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower supply, door not closedCheck plug/power; ensure door latched securely.
Poor cleaning resultsOverloading, wrong program, clogged filterLoad properly; select intensive program; clean filter.
Water not drainingDrain hose clogged/kinkedCheck hose for obstructions; ensure proper height.
Leaking waterDoor seal damaged, hose looseInspect seal; tighten hose connections.
Unusual noiseSpray arm obstructed, foreign objectCheck for items blocking spray arm; remove object.
Detergent not dissolvingDispenser clogged, wet tabletsClean dispenser; ensure detergent dry before loading.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not disassemble.

Beko Dishwasher DIN15310 Manual © - All Rights Reserved 2025