Beko Dishwasher DIN15330 Manual

The Beko DIN15330 is a built-in dishwasher featuring energy-efficient operation, multiple wash programs, adjustable racks, a salt and rinse aid system, and a delay start function. It complies with European DIN 15330 standards for dimensions and installation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper and lower racks, cutlery basket, filter system, salt and rinse aid dispensers, inlet and drain hoses.

Feature	Description
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	Program start delay from 1 to 24 hours
Half Load	Eco wash for smaller loads
Child Lock	Safety lock for control panel
Water Softener	Integrated salt container for hard water
Rinse Aid Dispenser	Adjustable dispenser for spot-free drying
Adjustable Racks	Upper rack height adjustable for tall items
Filter System	Self-cleaning triple filter system
Energy Class	A++ energy efficiency rating
Acoustic Signal	End of program audible signal

Installation

Unpack and inspect contents. Ensure proper electrical and water connections.

Position dishwasher: Place in built-in cabinet according to DIN 15330 dimensions.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper drainage with anti-siphon loop.
Electrical connection: Connect to 220-240V, 50Hz grounded outlet.
Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before first use.

First-Time Setup

Before first use, prepare the dishwasher and set basic parameters.

Remove shipping materials: Take out all transit bolts and packaging.
Fill salt container: Add special dishwasher salt to the softener unit.
Fill rinse aid: Pour rinse aid into designated dispenser.
Run initial wash: Run an empty cycle with detergent to clean interior.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt in the salt container. Do not use table salt.

Specifications

Model: Beko DIN15330
Type: Built-in dishwasher
Place Settings: 13 standard place settings
Water Consumption: 9-12 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 815 x 598 x 550 mm (DIN 15330)
Water Pressure: 0.03 - 1 MPa
Mains Voltage: 220-240V ~ 50Hz
Programs: 6 wash programs + 4 temperature options

Controls and Settings

Control Panel: ON/OFF button, program selector, delay start, half load, child lock, start/pause.

Program Selection: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse (cold).

Settings: Water hardness adjustment (H1-H5), rinse aid dosage (1-6), acoustic signal on/off, reset function. Display shows program duration, remaining time, and error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

Scrape off large food residues before loading.
Lower rack: Place plates, pots, pans facing center.
Upper rack: Place glasses, cups, bowls at angle.
Cutlery basket: Place knives, forks, spoons with handles down.
Adjust upper rack: Lift to accommodate tall items.
Ensure spray arms rotate freely without obstruction.

Tip: Do not overload. Place delicate items in upper rack only.

Using Wash Programs

Select program according to soil level and dish type.

Add detergent: Use only dishwasher detergent in main dispenser.
Select program: Turn selector to desired program.
Optional settings: Set delay start or half load if needed.
Start cycle: Press start/pause button.
During cycle: Door locks automatically; display shows remaining time.
After completion: Wait for acoustic signal; open door slightly for drying.

WARNING! Do not open door during hot wash phases. Use only detergents specifically designed for dishwashers.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filters: Remove and rinse filters weekly under running water.
Clean spray arms: Check for clogged holes monthly.
Refill salt: Refill when salt indicator light illuminates.
Refill rinse aid: Refill when rinse aid indicator shows low.
Clean door seal: Wipe with damp cloth to remove residue.
Run cleaning cycle: Use dishwasher cleaner every 2-3 months.

CAUTION! Unplug appliance before any maintenance. Do not use abrasive cleaners.

Regulatory Information

CE marked according to EU directives. Complies with EN 50242, EN 60436, EN 60704 standards. Energy label class A++. This appliance meets DIN 15330 dimensions for built-in installation. For EU product registration and warranty, visit www.beko.com. Disposal: Follow local regulations for WEEE disposal.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply, door not closed	Check power outlet; ensure door is properly closed and latched.
Poor cleaning results	Spray arm obstruction, low detergent	Check spray arms rotate freely; use correct amount of detergent.
Water not draining	Drain hose clogged/kinked	Check drain hose for obstructions; ensure proper installation height.
Error code E1	Water inlet problem	Check water tap is open; inspect inlet hose and filter.
Error code E3	Water heating issue	Check heating element; may require service.
Leaking water	Door seal damaged, hose connection	Inspect door seal; check all hose connections are tight.
Noisy operation	Foreign object in pump, improper loading	Check for objects in pump area; ensure dishes don't obstruct spray arms.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service at 0800-123456 or visit www.beko.com/support