Beko Dishwasher DIN15Q20 Manual

The Beko DIN15Q20 is a 15-place setting freestanding dishwasher with A++ energy rating, featuring 7 wash programs, half-load option, delay timer, child lock, salt and rinse aid indicators, and adjustable upper basket. Designed for standard kitchen installation with water and electrical connections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, water inlet and drain hoses.

Feature	Description
Energy Rating	A++ for energy efficiency
Place Settings	15 standard place settings capacity
Wash Programs	7 programs including Eco, Intensive, Quick
Half Load Option	Reduces water and energy for smaller loads
Delay Timer	1-24 hour start delay
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Adjustable Upper Basket	Height adjustable for taller items
Digital Display	Shows program time and status
Acoustic Signal	Optional end-of-cycle beep

Installation

Unpack and inspect contents. Position near water and drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the appliance: Adjust feet to ensure dishwasher is level and stable.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg special dishwasher salt.
Fill rinse aid: Open dispenser on door, fill to MAX line with rinse aid.
Run empty wash: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness.

CAUTION! Only use dishwasher salt in salt container. Regular salt will damage the softener.

Specifications

Model: DIN15Q20
Type: Freestanding dishwasher
Capacity: 15 place settings
Energy Rating: A++
Water Consumption: 10-12 liters per cycle (Eco program)
Power Consumption: 0.85 kWh per cycle (Eco program)
Noise Level: 49 dB
Programs: 7 (Eco, Intensive, Normal, Quick, Glass, Pre-Rinse, Soak)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz

Controls and Settings

Control Panel: ON/OFF button, program selector, delay timer, half load, start/pause, child lock.

Programs: Eco (energy saving), Intensive (heavily soiled), Normal (daily use), Quick (58 min), Glass (gentle), Pre-Rinse (rinse only), Soak (pre-wash).

Settings: Delay timer (1-24 hours), half load (for fewer dishes), child lock (press and hold for 3 seconds), acoustic signal (enable/disable in settings). Display shows: program time, delay time, salt/rinse aid indicators, error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Lower basket: Plates, pots, pans (face center, avoid blocking spray arm).
Upper basket: Cups, glasses, small plates (angled downward).
Cutlery basket: Knives (handles down), spoons/forks mixed for separation.
Adjust upper basket: Lift to highest position for tall items.

Tip: Do not overload. Ensure spray arms can rotate freely.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main dispenser with powder or tablet. Use correct amount for soil level.
Rinse aid: Fill dispenser, adjust dosage (1-6) based on water hardness and spotting.
Salt: Only in salt container. Refill when indicator lights.
Pre-wash detergent: Optional for heavily soiled loads in pre-wash chamber.

WARNING! Do not use regular washing-up liquid. It creates excessive suds.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove lower basket, twist filter assembly, rinse under water weekly.
Clean spray arms: Check for blockages, remove if necessary.
Wipe door seals: Clean with damp cloth to prevent mold.
Descale: Run empty with dishwasher cleaner every 2-3 months if in hard water area.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not open door during hot programs; steam may cause burns.
Keep children away from open dishwasher and detergents.
Sharp items points down in cutlery basket.
Do not sit or stand on open door.

Emergency: In case of leak, turn off water supply and disconnect power.

Regulatory Information

CE marked. Complies with EU directives for low voltage and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check plug, fuse, circuit breaker. Ensure door is closed properly.
Poor cleaning results	Loading/detergent	Check spray arms not blocked. Use correct amount of fresh detergent.
Water not draining	Filter/drain hose	Clean filter. Check drain hose for kinks or blockages.
Leaking water	Hoses/door seal	Tighten water connections. Check door seal for damage or food debris.
Error code on display	Various faults	Consult manual error code list. Common: E1 (water inlet), E2 (drain), E3 (heating).

Reset: Turn off at mains for 2 minutes, then restart.

Service: Contact authorized Beko service. Keep model number ready.