Beko Dishwasher DIN24310 Manual

The Beko DIN24310 is a freestanding dishwasher featuring energy efficiency, multiple wash programs, adjustable racks, delay start, child lock, and salt/rinse aid indicators. Designed for standard household use with a 12-place setting capacity, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Spray arms, Filter system, Detergent dispenser, Salt container, Rinse aid dispenser, Adjustable upper basket, Cutlery basket.

Feature	Description
Control Panel	Digital display with program selection buttons
Spray Arms	Upper and lower rotating arms for thorough cleaning
Filter System	Three-stage filtration (coarse, fine, micro)
Detergent Dispenser	Dual compartment for main wash and pre-wash
Salt Container	For water softening (located at bottom of tub)
Rinse Aid Dispenser	Adjustable dosage for spot-free drying
Adjustable Upper Basket	Height adjustable in two positions
Cutlery Basket	Removable basket with separate compartments
Delay Start	Programmable delay from 1 to 24 hours
Child Lock	Safety lock to prevent accidental program changes

Installation

Unpack and inspect contents. Position near water supply and drain.

Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the appliance: Adjust feet to ensure dishwasher is level and stable.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water connections are tight to prevent leaks. Use only recommended hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging from interior.
Fill salt container: Add 1-1.5 kg of special dishwasher salt (first use requires water filling).
Fill rinse aid: Pour into dispenser until MAX indicator; adjust dosage setting (1-6).
Run initial cycle: Select intensive program without dishes to clean interior.

CAUTION! Only use salt specifically designed for dishwashers. Do not use table salt.

Specifications

Model: DIN24310
Type: Freestanding dishwasher
Capacity: 12 standard place settings
Energy Class: A++ (Energy efficiency scale)
Water Consumption: Approx. 9-11 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Programs: Intensive, Eco, Quick, Glass, Delicate, Auto

Controls and Settings

Control panel includes: ON/OFF button, Program selection buttons, Delay Start, Child Lock, Start/Pause.

Programs: Intensive (70°C), Eco (50°C), Quick (45°C, 30 min), Glass (40°C), Delicate (40°C), Auto (45-65°C).

Settings: Delay Start (1-24h), Child Lock (press 3 sec), Rinse Aid level adjustment, Salt refill indicator.

Display Icons: Program progress, Salt warning, Rinse aid warning, Door open, End of cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans (face inward toward center).
Upper basket: For glasses, cups, small bowls (angled downward).
Cutlery basket: Place knives pointing down; mix types for better washing.
Adjust upper basket: Lift to higher position for taller items.

Tip: Do not overload; ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Fill main wash compartment; add pre-wash detergent if heavily soiled.
Select program: Press program button until desired program lights up.
Optional settings: Set Delay Start if needed; activate Child Lock.
Start cycle: Close door firmly; press Start/Pause button.
After cycle: Wait for End indicator; open door slightly to allow steam to escape.

WARNING! Use only dishwasher detergents. Hand washing detergents cause excessive suds.

Maintenance & Care

Regular maintenance ensures longevity and performance.

Clean filters: Remove and rinse under warm water weekly.
Check spray arms: Ensure holes are not clogged; rotate freely.
Refill salt: When salt indicator lights, add salt (ensure water softener setting matches water hardness).
Refill rinse aid: When low indicator lights, fill to MAX line.
Exterior cleaning: Wipe with damp cloth; never use abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not remove filters during operation.

Safety Features

Child Lock: Prevents program changes during operation (activate by holding button 3 seconds). Door Safety: Automatically stops operation if door opened. Overflow Protection: Float switch stops water intake if detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power supply; ensure door is closed properly.
Poor cleaning results	Loading/detergent	Improve loading; use correct amount of fresh detergent.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks/blockages.
Salt indicator remains on	Salt container empty	Refill salt container; run short program to dissolve salt.
Unusual noise	Spray arm obstruction	Check for items blocking spray arms; ensure properly seated.
Leaking water	Hose connections	Tighten inlet/drain hose connections; check door seal for debris.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service center; have model number ready.