Beko Dishwasher DIN25410 Manual

The Beko DIN25410 is a built-in dishwasher featuring energy-efficient operation, multiple wash programs, adjustable racks, delay start, child lock, and water softener settings. Designed for standard 60cm kitchen units, it includes a digital display, half-load option, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Digital control panel, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser, inlet/outlet hoses.

Installation

Unpack and inspect contents. Ensure proper space and connections.

1. Position dishwasher: Place in 60cm wide cabinet opening, level using adjustable feet.
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1MPa).
3. Connect drain hose: Route to sink drain or standpipe (height 40-100cm from floor).
4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
5. Secure to cabinet: Use screws provided to fix dishwasher to adjacent units.

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

1. Remove transport materials: Take out shipping brackets and tape.
2. Fill salt container: Unscrew cap, add 1kg special dishwasher salt, fill with water.
3. Fill rinse aid: Open dispenser, fill to MAX line with rinse aid liquid.
4. Select water hardness: Set dial inside salt container (1-5 based on local water).
5. Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Table salt will damage the softener.

Specifications

• Type: Built-in, front-loading dishwasher.
• Capacity: 10 place settings.
• Energy Rating: A++ (EC 1059/2010).
• Water Consumption: 9.5 liters per cycle (Eco program).
• Power Consumption: 0.78 kWh per cycle (Eco program).
• Noise Level: 49 dB(A).
• Programs: Auto (45-65°C), Intensive (70°C), Eco (50°C), Quick (35°C), Glass (40°C), Rinse.
• Dimensions (HxWxD): 82 x 59.8 x 55 cm.
• Weight: 32 kg.
• Power Supply: 220-240V, 50Hz, 10A.

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Program Selection: Turn knob to select program; display shows duration and temperature.

Settings: Delay Start (1-24 hours), Half Load (reduces consumption), Child Lock (press 3 sec to activate). Indicators: Salt (red light), Rinse Aid (green light). Options: Extra Dry (extends drying), Intensive Zone (for lower basket).

Connecting Water & Drain

Water Inlet: Cold water connection only. Drain: Hose to sink or standpipe.

1. Turn off water supply before connecting inlet hose.
2. Use only provided hoses; do not extend or replace with non-standard parts.
3. Ensure drain hose is secured higher than 40cm to prevent siphoning.
4. Check for leaks after first connection.

Tip: Install a shut-off valve for easy maintenance.

Loading and Programs

Load dishes according to symbols on racks.

1. Scrape off large food residues; no pre-rinsing needed.
2. Lower basket: Plates, pots, pans. Upper basket: Glasses, cups, bowls.
3. Cutlery basket: Place knives pointing down for safety.
4. Select program: Auto for daily use, Eco for energy saving, Quick for lightly soiled.
5. Add detergent: Use only dishwasher detergent in dispenser.
6. Press START; door locks automatically.
7. After cycle, wait 2 minutes before opening to avoid steam.

WARNING! Do not overload; ensure spray arms can rotate freely. Plastic items on upper rack only.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean filters weekly: Remove lower basket, twist out filter assembly, rinse under tap.
2. Check spray arms monthly: Remove and clear any debris from nozzles.
3. Wipe door seals: Use damp cloth to remove residue.
4. Descale every 3 months: Run empty cycle with dishwasher cleaner.
5. Refill salt: When red light illuminates, add salt (only when dishwasher is off).
6. Refill rinse aid: When green light dims, fill to MAX line.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Disables controls when activated. Door Safety: Automatically stops if door opened during wash. Overflow Protection: Float switch cuts water if detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE compliant; meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

Reset: Turn off at mains for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com