Beko Dishwasher DIN28425 Manual

The Beko DIN28425 is a freestanding dishwasher featuring multiple wash programs, energy-efficient operation, adjustable upper basket, salt and rinse aid indicators, child lock, delay start, and aquastop protection. Designed for standard household use with a 12-place setting capacity. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

FeatureDescription
Wash ProgramsAuto, Intensive, Eco, Quick, Glass, Rinse
Capacity12 standard place settings
Energy RatingA++ (Energy Efficient)
Delay StartProgrammable start time (1-24 hours)
Child LockPrevents accidental program changes
Salt & Rinse Aid IndicatorsLED alerts for refill needs
AquastopFull protection against water leaks
Half Load OptionEco wash for fewer dishes
Adjustable Upper BasketHeight adjustment for tall items
Drying FunctionExtra drying with fan assist

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
  3. Level the appliance: Adjust feet until dishwasher is stable and level.
  4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare dishwasher and run initial cycle.

  1. Remove transport materials: Take out all interior packaging and securing bolts.
  2. Fill salt container: Add 1 kg of dishwasher salt (first use requires water filling).
  3. Fill rinse aid: Pour into dispenser until MAX indicator.
  4. Run empty wash: Select Intensive program at highest temperature without dishes.

CAUTION! Only use dishwasher-specific salt and rinse aid. Do not mix with detergent.

Specifications

Controls and Settings

Control Panel: Power button, Program selector, Delay Start, Half Load, Child Lock, Start/Pause.

Program Guide: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse (cold).

Settings: Delay Start (1-24h), Child Lock (press 3 sec), Salt indicator (flashes when empty), Rinse aid indicator (flashes when low). Display shows: Program time remaining, Program selected, Options active.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

  1. Scrape off large food residues (no pre-rinsing needed).
  2. Lower basket: Plates, pots, pans (face inward).
  3. Upper basket: Glasses, cups, small bowls (angled downward).
  4. Cutlery basket: Knives, forks, spoons (handles down, mixed types).
  5. Adjust upper basket: Lift to accommodate tall items.
  6. Ensure spray arms rotate freely.

Tip: Do not overload. Place delicate items in upper basket only.

Using Wash Programs

Select program based on soil level and dish type.

  1. Add detergent: Use powder, tablet, or gel in dispenser.
  2. Select program: Turn knob to desired setting.
  3. Add options: Press Half Load if less than full.
  4. Delay Start: Set if needed (1-24 hours).
  5. Start: Close door firmly, press Start/Pause.
  6. During cycle: Door locks automatically; display shows time remaining.
  7. After completion: Wait 2 minutes before opening (steam release).

WARNING! Only open door when program is complete or paused. Use only dishwasher detergent.

Care & Maintenance

Regular maintenance ensures longevity and performance.

  1. Clean filter: Remove and rinse weekly under running water.
  2. Clean spray arms: Check for blockages monthly.
  3. Descale: Run empty with vinegar or descaler every 3 months.
  4. Exterior: Wipe with damp cloth; never use abrasive cleaners.
  5. Check seals: Clean door gasket regularly.

CAUTION! Unplug before any maintenance. Do not use steam cleaners.

Safety Features

Child Lock: Press and hold for 3 seconds to activate/deactivate. Aquastop: Automatic water shutoff if leak detected. Door Lock: Automatically engages during wash cycles. Overheat Protection: Thermostat prevents excessive temperatures.

Regulatory Information

CE compliant: Meets EU safety and environmental standards. WEEE directive: Dispose of properly at recycling center. Energy Label: A++ rating according to EU regulation 1059/2010. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower/doorCheck power supply; ensure door closed properly; check child lock.
Poor cleaning resultsLoading/detergentRearrange dishes; check spray arms; use correct detergent amount.
Water not drainingFilter/drain hoseClean filter; check drain hose for kinks; ensure proper height.
Salt indicator flashingSalt lowRefill salt container; run short program to distribute.
Unusual noiseSpray arm/dishesCheck for obstruction in spray arms; ensure dishes not touching arms.
Leaking waterHoses/door sealTighten connections; check door seal for damage; ensure level.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com

Beko Dishwasher DIN28425 Manual © - All Rights Reserved 2025