Beko Dishwasher DIN28431 Manual

The Beko DIN28431 is a freestanding dishwasher featuring multiple wash programs, energy efficiency class A, adjustable upper basket, salt and rinse aid indicators, child lock, delay start, and aquastop protection. It is designed for standard household use with a capacity of 12 place settings. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents and Additives 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Spray Arms, Filter System, Detergent Dispenser, Salt Container, Rinse Aid Dispenser, Upper and Lower Baskets, Cutlery Basket.

Feature	Description
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Pre-Rinse
Energy Class	A (Energy Efficient)
Capacity	12 Standard Place Settings
Delay Start	Programmable start time (1-24 hours)
Child Lock	Locks control panel during operation
Aquastop	Full protection against water leaks
Salt & Rinse Aid Indicators	LED indicators for low levels
Adjustable Upper Basket	Height adjustable for taller items
Half Load Option	Eco wash for partial loads
Digital Display	Shows remaining time and program status

Installation

Unpack and inspect contents. Position near water inlet, drain, and power socket.

Connect water inlet: Attach supply hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place into sink or connect to waste pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power socket.

WARNING! Ensure water and electrical connections are performed by a qualified person if unsure. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of special dishwasher salt, then run a short wash program without dishes.
Fill rinse aid dispenser: Open lid, fill to MAX line, close lid.
Select language: Press and hold PROGRAM button for 3 seconds to cycle through languages.
Run initial empty wash: Select Intensive program at highest temperature to clean interior.

CAUTION! Only use salt specifically designed for dishwashers. Do not use table salt.

Specifications

Model: DIN28431
Type: Freestanding Dishwasher
Capacity: 12 Place Settings
Energy Rating: A
Water Consumption: Approx. 11 L per cycle (Eco program)
Power Consumption: Approx. 0.95 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240 V ~ 50 Hz
Inlet Water Pressure: 0.03 - 1 MPa

Controls and Settings

Access programs and settings via the front control panel.

Control Panel: POWER ON/OFF, PROGRAM SELECTION (Auto, Intensive, Eco, Quick, Glass, Pre-Rinse), DELAY START (1-24h), CHILD LOCK, HALF LOAD, START/PAUSE.

Program Details: Auto (senses soil level), Intensive (for heavily soiled, 70°C), Eco (energy saving, 50°C), Quick (30 min for lightly soiled), Glass (gentle for crystal), Pre-Rinse (holds dishes until full load). Settings: Adjust water hardness via salt setting (H1-H5). Rinse aid dosage adjustable (1-5).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues.
Load lower basket: Pots, pans, plates. Face soiled surfaces towards spray arm.
Load upper basket: Glasses, cups, saucers, small bowls.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Adjust upper basket height if needed for taller items.
Ensure spray arms rotate freely and are not blocked.

Tip: Do not overload. Place lightweight items securely to prevent tipping.

Using Detergents and Additives

Use only detergents and additives designed for dishwashers.

Detergent: Fill main wash compartment in dispenser. Use tablet, powder, or gel. Amount depends on soil level and water hardness.
Rinse Aid: Fill dispenser as indicated. Adjust dosage level (1-5) for spot-free drying.
Salt: Only for models with water softener. Fill salt container when indicator lights.
Pre-wash detergent: For heavily soiled loads, add a small amount to the pre-wash compartment.

WARNING! Do not mix different detergent types (e.g., tablet with powder). Keep all additives out of reach of children.

Care & Cleaning

Regular maintenance ensures longevity and performance.

Clean filters: Remove lower basket, twist and lift out filter assembly. Rinse under warm water weekly.
Clean spray arms: Check for clogged holes. Remove by unscrewing and rinse.
Wipe door seals and interior: Use damp cloth with mild detergent. Do not use abrasive cleaners.
Exterior: Clean with soft damp cloth.
Run monthly maintenance: Use a dishwasher cleaner or run an empty cycle with a cup of vinegar on the upper rack.

CAUTION! Unplug appliance before cleaning. Do not use steam cleaners.

Regulatory Information

CE Marked: Complies with European Directives for safety and electromagnetic compatibility. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Recycle according to local regulations. For EU product database, visit [eprel.ec.europa.eu]. Copyright and trademarks owned by Beko plc. For support, visit www.beko.com or contact your local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check plug, fuse, and power. Ensure door is closed properly. Check if Child Lock is activated.
Poor washing results	Loading, filters, detergent	Check loading, clean filters, use correct amount of fresh detergent, ensure spray arms are not blocked.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks. Clean filter system. Ensure waste pipe connection is correct.
Salt indicator remains on	Salt container empty, setting incorrect	Refill salt container. Check and adjust water hardness setting (H1-H5).
Unusual noise	Spray arm, foreign object	Check for items obstructing spray arm rotation. Remove any foreign objects from pump area.
Leaking water	Hose connections, door seal	Check inlet and drain hose connections. Inspect door seal for damage or food debris. Ensure dishwasher is level.

Reset: Unplug for 5 minutes, then restart. Or press and hold START/PAUSE for 10 seconds.

Service: Consult user manual first. For technical assistance, contact authorized Beko service: www.beko.com/support.