beko dishwasher DIN28433 manual

The Beko DIN28433 is a freestanding dishwasher designed for efficient cleaning with multiple wash programs, energy-saving features, and a user-friendly control panel. It features a stainless steel interior, adjustable upper basket, cutlery basket, salt and rinse aid indicators, child lock, delay start, and aquastop protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Stainless steel tub, Upper and lower baskets, Cutlery basket, Filter system, Salt and rinse aid compartments, Inlet and drain hoses.

Feature	Description
Control Panel	Digital display with program selection buttons
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	Program start delay from 1 to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Salt Indicator	LED indicates when water softener salt is low
Rinse Aid Indicator	LED indicates when rinse aid needs refilling
Aquastop	Protection against water leakage
Adjustable Upper Basket	Height adjustable for taller items
Half Load Option	Reduces water and energy for smaller loads
Energy Rating	A++ for energy efficiency

Installation

Unpack and inspect contents. Position near water inlet, drain, and power outlet.

Level the dishwasher: Adjust feet until unit is stable and level.
Connect water inlet: Attach inlet hose to cold water supply (max pressure 1 MPa).
Connect drain hose: Place hose into sink or connect to waste pipe (min height 40 cm).
Connect to power: Plug into grounded 220-240V, 50Hz outlet.
Remove transport locks: Remove screws and brackets from rear.

WARNING! Ensure water and electrical connections are secure. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Open cap, fill with special dishwasher salt, then tighten.
Fill rinse aid: Open dispenser, fill to MAX line, close lid.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match local water hardness.
Load test dishes: Follow loading guidelines for optimal cleaning.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding dishwasher.
Capacity: 13 place settings.
Energy Consumption: 0.95 kWh per cycle (Eco program).
Water Consumption: 10 liters per cycle (Eco program).
Noise Level: 49 dB(A).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Water Pressure: 0.03 - 1 MPa.
Programs: Auto, Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Rinse.
Special Features: Delay start, child lock, half load, aquastop.

Controls and Settings

Control Panel: ON/OFF, Program selection buttons, Delay Start, Child Lock, Start/Pause.

Program Selection: Press program button repeatedly to cycle through options. Corresponding LED will illuminate.

Delay Start: Press Delay button, then use +/- to set hours (1-24). Start/Pause: Starts selected program or pauses running cycle. Child Lock: Press and hold Delay and Intensive buttons for 3 seconds to activate/deactivate. Salt Indicator: Lights when salt container is empty. Rinse Aid Indicator: Lights when rinse aid is low.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans. Place facing center, avoid blocking spray arm.
Upper basket: For glasses, cups, small plates. Adjust height if needed.
Cutlery basket: Place knives (handles up), spoons and forks mixed for separation.
Check spray arms rotate freely after loading.

Tip: Do not overload. Place delicate items in upper basket only.

Using Wash Programs

Select program based on soil level and dish type.

Auto: Automatically adjusts time and temperature based on soil sensors.
Intensive: For heavily soiled pots and pans (70°C, 180 min).
Eco: Energy-efficient for normally soiled dishes (50°C, 195 min).
Quick: For lightly soiled loads, no drying (30 min).
Glass: Gentle wash for crystal and delicate glassware (40°C).
Rinse: Rinse only, no detergent (15 min).

WARNING! Use only dishwasher detergent. Do not use hand soap or laundry detergent.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Clean filter: Remove lower basket, twist filter assembly, rinse under water weekly.
Clean spray arms: Check for clogs, rinse holes monthly.
Check salt level: Refill when indicator lights (approx. every 2 months).
Check rinse aid: Refill when indicator lights.
Wipe door seals: Clean with damp cloth to prevent mold.
Run empty hot cycle: Monthly with dishwasher cleaner to remove grease.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open door (hot surfaces).

Do not open door during wash cycle (hot steam risk).
Only use detergent specifically for dishwashers.
Ensure knives and sharp objects are placed handles up.
Do not wash items contaminated with gasoline, oils, or chemicals.
Disconnect power before any maintenance.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check power outlet; ensure door closed properly; deactivate child lock.
Poor cleaning results	Loading, filter, detergent	Check loading; clean filter; use fresh detergent; ensure water hot enough.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks; clean filter; ensure drain height correct.
Leaking water	Hose connections, door seal	Tighten inlet/drain connections; check door seal for damage; ensure level.
Unusual noise	Spray arm, foreign objects	Check spray arms not hitting dishes; remove foreign objects from pump.
Salt indicator on	Salt empty	Refill salt container; run short wash program to flush system.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service: www.beko.com/support